Forest Managment Companies--Environmental Requirments-- Certification Program (CEAF Programs)
Scope of the Certification
The scope of the company's certification is defined depending on its activities. Following the initial audit, the scope is confirmed by the auditor and listed on the certificate. The activities that may be included in the scope are: timber harvesting, forest road construction, forest camp management and non-commercial silvicultural work (including the type of…
Vacuum technology — Vacuum gauges — Characterization of quadrupole mass spectrometers for partial pr...
This document describes procedures to characterize quadrupole mass spectrometers (QMSs) with an ion source of electron impact ionization and which are designed for the measurement of atomic mass-to-charge ratios m/z < 300.
This document is not applicable to QMSs with other ion sources, such as chemical ionization, photo-ionization or field ionization sources and for the measurements of higher…
STANDARD FOR SITE QUALITY ASSURANCE PROGRAM FOR SPRAY APPLIED POLYURETHANE FOAM
1 SCOPE
1.1 This standard outlines the requirements for a site quality assurance program (SQAP) for the on-site
installation of spray applied polyurethane foam (SPF). As the installation of the material is dependent on
the installer, a site quality assurance program is required to provide assurance of compliance to material
and installation standards to the property owner, authority having…
Information technology — Data centre facilities and infrastructures — Part 2: Building construction
ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability.
ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following:
a) location and site selection;
b) building…
Information technology - Data centre facilities and infrastructures - Part 2: Building construction
ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability.
ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following:
a) location and site selection;
b) building…
Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie...
Le présent document spécifie un format de données pour consigner le résultat des mesurages des émissions des gaz d'échappement des moteurs alternatifs à combustion interne utilisés dans les installations mobiles, transportables et fixes, à l'exclusion des moteurs de véhicules conçus à l'origine pour des applications routières. Il contient les informations de base du moteur soumis à…
Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuri...
ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required…
Lifecycle risk management for integrated CCS projects
ISO/TR 27918:2018 is designed to be an information resource for the potential future development of a standard for overall risk management for CCS projects. The risks associated with any one stage of the CCS process (capture, transportation, or storage) are assumed to be covered by specific standard(s) within ISO/TC 265 and other national and/or international standards. For example, the risks…
Woodworking machines — Safety — Part 10: Building site saws (contractor saws)
ISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines".
NOTE 1 For the definition of displaceable machine, see ISO 19085‑1:2017, 3.5.
ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as…
Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-3: Genera...
IEC TS 62257-7-3:2018(E) specifies the general requirements for the selection, sizing, erection and operation of generator sets in decentralized rural electrification systems. It applies to all low voltage combustion engine electricity generator sets energized by renewable energy such as biomass gasifier or biogas, or fossil fuel such as gasoline or diesel fuel, and designed for supplying…
