1 Scope
1.1
This Standard sets forth characteristics of effective and durable installation methods, in both new and existing buildings, of fenestration products within the scope of AAMA/WDMA/CSA 101/I.S.2/A440 that are intended for installation in buildings of all occupancies to which NBC Parts 3, 4, 5, and 6 of Division B apply.
1.2
In addition to fenestration products within the scope of…
1 Scope
1.1
This Standard specifies the design, installation, operation, and maintenance of site-built and modular gaseous hydrogen fuelling stations (HFS) intended to fuel on-road vehicles.
1.2
Unless otherwise stated, the standard conditions are as follows: temperature 15 °C and pressure 101 kPa.
1.3
In case of conflict between this Standard and federal, provincial, state, or local…
Radioprotection — Surveillance et dosimétrie en cas d'exposition interne due à la contamination...
Le présent document spécifie les exigences relatives à la surveillance de la contamination individuelle et l'évaluation de la dose à la suite de plaies impliquant des matériaux radioactifs. Il inclut les exigences relatives à la surveillance directe du site de la plaie, la surveillance du transfert des radionucléides dans l'organisme et l'évaluation des doses locales et systémiques…
Radiological protection — Monitoring and dosimetry for internal exposures due to wound contamination...
This document specifies the requirements for personal contamination monitoring and dose assessment following wounds involving radioactive materials. It includes requirements for the direct monitoring at the wound site, monitoring of uptake of radionuclides into the body and assessment of local and systemic doses following the wound event.
It does not address:
— details of monitoring and…
Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle hou...
This document provides information on how to assess the severity of machine tool spindle vibrations measured on the spindle housing. It gives specific guidance for assessing the severity of vibration measured on the spindle housing at customer sites or at the machine tool manufacturer's test facilities.
Its vibration criteria apply to gear-driven spindles intended for stationary machine…
Broches pour machines-outils — Évaluation des vibrations d'une broche pour machine-outil par me...
Le présent document fournit des informations sur la façon d'évaluer l'intensité vibratoire d'une broche d'une machine-outil, mesurée sur le corps de broche. Il fournit des recommandations spécifiques pour l'évaluation de l'intensité vibratoire mesurée sur le corps de broche, sur le site du client ou sur les installations d'essais du fabricant de la machine-outil…
Technical product documentation — Requirements for digital mock-up virtual assembly test for mechani...
This document specifies the requirements for a digital mock-up virtual assembly test (VAT) for mechanical products, which is suitable for guiding virtual assembly testing before physical production. The application of this document is intended to result in an effective VAT and efficient on-site assembly. This test is applicable to 3D nominal models with theoretically exact dimensions.
Systèmes de production d'énergie à batteries d'accumulateurs à circulation d'électrol...
L’IEC 62932-2-1:2020 spécifie les méthodes d’essai et les exigences applicables au système de batterie d’accumulateur à circulation d’électrolyte (FBS) et au système de production d’énergie à batterie d’accumulateur à circulation d’électrolyte (FBES) pour la vérification de leurs performances.
Le présent document s’applique au FBES ou au FBS conçu et utilisé sur des sites stationnaires (c’est-à-…
Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibrat...
This document specifies the metrological and technical requirements for flowmeters intended to be used for the dynamic measurement of liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids. For LNG static volume measurement used in custody transfer, see ISO 10976.
This document sets the best practice for the proper selection and installation of flowmeters in cryogenic applications…
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio d...
CISPR 16-1-3:2004+A1:2016+A2:2020 is designated a basic standard, which specifies the characteristics and calibration of the absorbing clamp for the measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. In this edition a more detailed calibration method for…
