Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 461 - 470 de 1852
Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electr...
1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR CONDITIONERS, and DEHUMIDIFIERS incorporating motor-compressors and HYDRONIC FAN COILS UNITS, their maximum RATED VOLTAGES being not more than 250 V for single phase appliances and 600 V for all other appliances. PARTIAL…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
2019-10-31
Code(s) de l'ICS :
23.120
Erosion and sedimentation management for northern community infrastructure
1 Scope 1.1 General This Standard applies to the management of erosion and sedimentation risks, including the evaluation, planning, design, implementation, monitoring, and maintenance of erosion and sedimentation risk management strategies and mitigation measures for new and existing infrastructure in northern communities. This Standard provides a) an outline of procedures for conducting an…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2019-10-31
Code(s) de l'ICS :
93.010
Gestion de l’érosion et de la sédimentation pour l’infrastructure des collectivités nordiques
1 Domaine d’application 1.1 Généralités Cette norme vise la gestion des risques d’érosion et de sédimentation, notamment l’évaluation, la planification, la conception, la mise en oeuvre, la surveillance et l’entretien de stratégies de gestion des risques d’érosion et de sédimentation et des mesures d’atténuation pour les infrastructures neuves et existantes dans les collectivités nordiques.…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2019-10-31
Code(s) de l'ICS :
93.010
Exploitation et entretien des établissements de santé
1 Domaine d’application 1.1 Cette norme énonce les exigences pour l’E et E d’un ÉSS, y compris les exigences relatives au système qualité. Elle énonce les exigences particulières relatives aux éléments suivants : a) les bâtiments et les systèmes architecturaux; b) les aspects du site liés au bâtiment et à ses fonctions, y compris les voies d’accès sur place; c) les infrastructures…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2019-10-31
Code(s) de l'ICS :
11.020
Qualité du sol — Schémas conceptuels de sites pour les sites potentiellement pollués
Le présent document fournit des recommandations relatives à l'élaboration et l'utilisation de schémas conceptuels de sites (SCS) tout au long des diverses phases d'investigation, de remédiation (si nécessaire) et de tous les chantiers ou travaux de génie civil ultérieurs. Il décrit ce que sont les SCS, pourquoi ils sont utilisés et quels sont leurs constituants. Il souligne le…
Éditeur :
ISO
Statut :
Publié
Date de publication :
2019-10-30
Code(s) de l'ICS :
13.080.01
Soil quality — Conceptual site models for potentially contaminated sites
This document provides guidance on developing and using conceptual site models (CSMs) through the various phases of investigation, remediation (if required), and any subsequent construction or engineering works. It describes what CSMs are, what they are used for and what their constituents are. It stresses the need for an iterative and dynamic approach to CSM development. This document is…
Éditeur :
ISO
Statut :
Publié
Date de publication :
2019-10-30
Code(s) de l'ICS :
13.080.01
Marine energy - Wave, tidal and other water current converters - Part 2: Marine energy systems - Des...
IEC TS 62600-2:2019 provides design requirements to ensure the engineering integrity of wave, ocean, tidal and river current energy converters, collectively referred to as marine energy converters. Its purpose is to provide an appropriate level of protection against damage from all hazards that may lead to catastrophic failure of the MEC structural, mechanical, electrical or control systems.…
Éditeur :
IEC
Statut :
Publié
Date de publication :
2019-10-17
Code(s) de l'ICS :
27.140
Information technology — Security techniques — Authentication context for biometrics
This document defines the structure and the data elements of Authentication Context for Biometrics (ACBio), which is used for checking the validity of the result of a biometric enrolment and verification process executed at a remote site. This document allows any ACBio instance to accompany any biometric processes related to enrolment and verification. The specification of ACBio is applicable not…
Éditeur :
ISO
Statut :
Publié
Date de publication :
2019-10-13
Code(s) de l'ICS :
35.030
Information technology - Security techniques - Authentication context for biometrics
This document defines the structure and the data elements of Authentication Context for Biometrics (ACBio), which is used for checking the validity of the result of a biometric enrolment and verification process executed at a remote site. This document allows any ACBio instance to accompany any biometric processes related to enrolment and verification. The specification of ACBio is applicable not…
Éditeur :
IEC
Statut :
Publié
Date de publication :
2019-10-13
Code(s) de l'ICS :
35.030
Carbon dioxide capture, transportation and geological storage — Carbon dioxide storage using enhance...
1 Scope 1.1 Applicability This document applies to carbon dioxide (CO2) that is injected in enhanced recovery operations for oil and other hydrocarbons (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association with the CO2-EOR project is sought. Recognizing that some CO2-EOR projects use nonanthropogenic CO2 in combination with anthropogenic CO2, the document…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2019-09-30
Code(s) de l'ICS :
13.020.40