Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet an...
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electrical motor-operated vacuum cleaners, including BACKPACK
VACUUM CLEANERS, and DUST EXTRACTORS, for wet suction, dry suction, or wet and dry suction,
intended for commercial indoor or outdoor use with or without attachments. They may be provided with a
blowing or inflating function…
Space systems — Verification programme and management process
This document establishes a set of requirements for planning and executing verification programmes for commercial/non-commercial manned and unmanned space systems.
This document defines a distributed verification programme for each contractor that engages in the development of any element of a space system, starting from the lowest level (i.e. unit/piece part level) and the earliest phase (i.e.…
Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-2: Genera...
IEC TS 62257-7-2:2022 applies to all small wind turbines (SWTs) with a swept area smaller than or equal to 200 m2, and designed for supplying electrical power to isolated sites used in systems as described in IEC TS 62257-2.
This document is not an exhaustive resource for the design, installation, operation or maintenance of small wind turbines and wind power systems, but is more focused on…
Industrial communication networks - Installation of communication networks in industrial premises
IEC 61918:2018+AMD1:2022 specifies basic requirements for the installation of media for communication networks in industrial premises and within and between the automation islands, of industrial sites. This standard covers balanced and optical fibre cabling. It also covers the cabling infrastructure for wireless media, but not the wireless media itself. Additional media are covered in the IEC…
Réseaux de communication industriels - Installation de réseaux de communication dans des locaux indu...
IEC 61918:2018+AMD1:2022 spécifie les exigences de base pour l’installation d'un support de réseaux de communication à l'intérieur et entre des îlots d'automatisation de sites industriels. Le présent document couvre le câblage symétrique et à fibres optiques. Elle couvre également l’infrastructure de câblage des supports sans fil, mais pas le support sans fil lui-même. D’autres…
Adhésifs — Lignes directrices pour la fabrication des structures collées par adhésifs et procédures ...
Le présent document apporte des lignes directrices pour décrire les exigences de qualité d'assemblage par collage pour les entreprises utilisant des adhésifs et l'assemblage par collage comme moyen d'assemblage. En particulier, les lignes directrices définissent différentes approches pour parvenir aux exigences de qualité pour les procédures de fabrication et d'établissement…
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures ...
This document provides guidelines describing the adhesive bonding quality requirements suitable for use by adhesive user-companies utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the importance of…
Liquefied natural gas (LNG) — Production, storage, and handling
1 Scope
1.1 Application
This Standard applies to the
a) design;
b) siting;
c) construction;
d) operation; and
e) maintenance
of facilities for the liquefaction of natural gas and facilities for the storage, vaporization, transfer,
handling, and truck transport of LNG. It also contains requirements for the training of personnel.
1.2 Other LNG applications
1.2.1
For facilities that load…
1 Scope
1.1 Applicability
1.1.1 Inclusions
This Standard applies to flares, incinerators, and enclosed combustors used in the following sectors:
a)
drilling operations;
b)
completions and well testing;
c)
well sites and gathering pipelines;
d)
thermal in-situ operations;
e)
process facilities (up to and ending at custody transfer at the product outlet point); and
f)
workovers and…
1 Domaine d’application
1.1 Applicabilité
1.1.1 Inclusions
La présente norme s’applique aux torchères, aux incinérateurs et aux chambres de combustion fermées utilisés dans les secteurs suivants :
a)
activités de forage;
b)
complétion et tests de puits;
c)
sites de puits et conduites d’amenée;
d)
activités thermiques sur le chantier;
e)
installations de traitement (jusqu’au transfert…
