Installation Code for Solid-Fuel-Burning Appliances and Equipment
1. Scope
1.1
Except as stated in Clause 1.3, this Standard covers requirements for the
installation of, alteration to, addition to, and provisions for maintenance of
solid-fuel-burning appliances and equipment intended to supply heat to air or
water.
Note: Recommendations for the storage of solid fuel and of ash are included in
Appendix A.
1.2
For the purpose of this Standard, solid…
Wind Energy Conversion Systems (WECS) - Performance
1. Scope
1.1 This Standard specifies methods for determining and reporting performance characteristics for wind energy conversion systems (WECS).
1.2 This Standard applies to WECS having mechanical, electrical, or thermal output.
1.3 This Standard is not concerned with WECS-produced noise, except to report the overall noise level.
1.4 This Standard does not address issues of…
Implants chirurgicaux — Fils et broches pour os — Partie 2: Broches de type Steinmann — Dimensions
La présente partie de l'ISO 5838 spécifie les dimensions des broches de type Steinmann. Les spécifications relatives aux matériaux et aux propriétés mécaniques font l'objet de l'ISO 5838-1.
NOTE 1 On attire l'attention sur l'éventuelle nécessité de concevoir de façon différente certaines pointes en fonction de facteurs tels que la méthode d'insertion et le site d…
Exigences relatives aux systèmes sismologiques dans les centrales nucléaires
CANDU
Énonce les exigences relatives aux systèmes sismologiques
installés dans les centrales nucléaires où les réponses sismiques
du site doivent être enregistrées.
Low-voltage switchgear and controlgear assemblies. Part 4: Particular requirements for assemblies fo...
This standard applies to type-tested assemblies (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out. These assemblies may…
Standard for Shop Fabricated Steel Aboveground Utility Tanks for Flammable and
Combustible Liquids
1. SCOPe
1.1 These requirements cover single and double wall cylindrical horizontal
steel tanks of the non-pressure type that are used for the aboveground storage
of flammable and combustible liquids with a relative density not greater than
1.0, such as gasoline, fuel oil, or similar products.
1.2 Section 3 of these requirements cover single wall tanks.
1.3 Section 4 of these…
Recommended Practice for the Installation of Wind Energy Conversion Systems
1. Scope
1.1 This Standard provides recommended practices and procedures, and outlines the required specifications for the installation of wind energy conversion systems.
1.2 This Standard is intended to be used in conjunction with other relevant CSA Standards and with manufacturers' instructions, drawings, and specifications in order to ensure the safety of installers and the…
Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, ...
Deals with the different stages of the setting out work, i.e. the measuring of the primary framework (traverses, grids, etc.) on the site, the setting out of reference lines (baselines), the transfer (plumbing up) of reference lines to other floors, the setting out of position points and the levelling procedure for these different stages. Gives values for permissible deviations when measuring and…
Earth-moving machinery — Loaders — Methods of measuring tool forces and tipping loads
Applies to crawler and wheeled loaders as defined in ISO 6165. Covers also definitions, apparatus, test site, preparation for test, and test report. Cancels and replaces the first edition (ISO 8313 : 1986), 3.4.1, 3.4.2, 3.5.1 and 9.1.1e) of which it constitutes a technical revision.
