Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods ...
CISPR 36:2020+AMD1:2023 CSV defines limits for 3 m measurement distance and methods of measurement that are designed to provide protection for off-board receivers (at 10 m distance) in the frequency range of 150 kHz to 30 MHz when used in the residential environment. NOTE Protection of receivers used on board the same vehicle as the disturbance source(s) is covered by CISPR 25. This document…
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium...
IEC 62620:2014+AMD1:2023 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former takes precedence. (e.g. IEC 62660 series on road…
This document defines the requirements for the external test equipment as:
— a means of establishing communications between a WWH-OBD-equipped vehicle and external test equipment;
— a set of diagnostic services, including addressing methods, to be provided by the external test equipment in order to exercise the services defined in ISO 27145‑3.
This document describes the minimum…
This document establishes a test method for evaluating the wear caused to the road surface by passenger car tyres and light truck tyres that are equipped with studs.
This document provides definitions, symbols and injury probability functions (IPFs) for the thigh, leg and knee intended to be used with the advanced pedestrian legform impactor (aPLI), a standardized pedestrian legform impactor with an upper mass for pedestrian subsystem testing of road vehicles. They are applicable to impact tests using the aPLI at 11,1 m/s involving:
— vehicles of category…
Agricultural machinery — Safety — Part 13: Large rotary mowers
This document, when used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of towed, semi-mounted, or mounted large rotary mowers with single or multiple cutting elements which have a cutting element tip circle of 1 000 mm or greater for any single cutting-element assembly, mounted on a propelling tractor or machine, intended for…
Road vehicles — Analysis of technical changes of ISO 5011:2020
This document analyses the impact of changes to ISO 5011:2020 as regards to the following:
— precleaner efficiency;
— elimination of two secondary element tests (collapse and blocking);
— revisions to the recommended ISO dust injector (Table 1);
— validation of the absolute filter weighing method; and
— inclusion of Annex H, "Penetration sensitivity".
These changes…
Road vehicles — Interchange of digital information on electrical connections between towing and towe...
This document specifies diagnostic application requirements and OSI-layer related communication profiles to ensure the interchange of digital information between towing and towed vehicles with a maximum authorized total mass greater than 3 500 kg.
The conformance and interoperability test plans are not part of this document.
Road vehicles — Technical personnel dealing with natural gas vehicles (NGVs) — Training and qualific...
This document specifies the requirements for the provisions of personnel dealing with the operation on natural gases (NG) fuelled vehicles in order to demonstrate their competence.
This document specifies the minimum requirements for training and qualification of personnel according to the level of safety required by the activity.
