Rechercher

ISO 23273-3:2006 specifies the essential requirements of fuel cell vehicles (FCV) for the protection of persons and the environment inside and outside the vehicles against electric shock. It applies only to on-board electric circuits with working voltages between 25 V a.c. and 1000 V a.c., or 60 V d.c. and 1500 V d.c. respectively. ISO 23273-3:2006 does not apply to: FCV connected to an external…

ISO 5006:2006 specifies a static test method for determining and evaluating the operator's visibility on a rectangular 1 m boundary close around the machine and on a 12 m visibility test circle. ISO 5006:2006 applies to wheel loaders, skid steer loaders, crawler loaders, backhoe loaders, wheel excavators, crawler excavators, rigid-frame dumpers, articulated frame dumpers, dumpers (front body…

ISO 19812:2006 specifies characteristics of M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and of their cylinder head housing, for use with spark-ignition engines.

1.1 Scope 1.1.1 Scope of Code This Code applies to the design, evaluation, and structural rehabilitation design of fixed and movable highway bridges in Canada. There is no limit on span length, but this Code does not necessarily cover all aspects of design for every type of long-span bridge. This Code also covers the design of pedestrian bridges, retaining walls, barriers, and highway accessory…

C1.1 Scope C1.1.1 Scope of Code The OHBDC (MTO 1991) was written for application within Ontario. CAN/CSA-S6-88 was generated with interprovincial co-operation for use in the other provinces of Canada and was largely derived from the preceding OHBDC edition. The provinces and CSA then agreed that the successor edition to both codes would be the Code, published by CSA. The Code has been written…

ISO 14572:2006 specifies test methods and requirements for basic and high-performance round, screened and unscreened, multi-core sheathed cables, intended for use in road vehicle applications. The unscreened, single-core cables must be in accordance with ISO 6722. Other cores may be used but, in these cases, the construction and tests required to ensure functionality of these cores must be agreed…

ISO 4926:2006 specifies the composition and characteristics of a reference fluid used for the compatibility testing of hydraulic braking systems and components mounted on road vehicles.

ISO 22902-2 is a representative example of possible customer experiences in terms of in-vehicle multimedia functions and features. These functions and features will be enabled by implementations of foreseeable technologies. It covers representative use cases in categories of commerce (abbreviated as COMM), customer relationship management (CUST), emergency (EMER), entertainment (ENTE), fleet…

The scope of ISO 22902-7:2006 is limited to conditions and testing at the equipment level; it does not include all conditions and testing necessary for complete verification and validation of the vehicle system. Environmental and reliability testing at lower and higher levels are required to ensure that vehicle quality and reliability objectives are met.

ISO 22902-1:2006 is based on the AMI-C specifications and reference documents for the automotive industry. It is established to facilitate the development, promotion and standardization of automotive information and entertainment system interfaces to motor vehicle communication networks. The technical glossary is a compilation of terms and definitions used in AMI-C technical publications. The…