Highway tanks and TC portable tanks for the transportation of dangerous goods
Scope
1.1
This Standard applies to tanks, other than intermediate bulk containers and tubes, used for the transportation of dangerous goods primarily by road. It considers the design, construction, certification, assembly, modification, repair, testing, inspection and periodic retesting, maintenance, and identification of such tanks. This Standard also applies to the hoses used to load or off-…
Road vehicles — Sheath-type glow-plugs — General requirements and test methods
ISO 7578:2008 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to those sheath-type glow-plugs conforming to ISO 6550‑1, ISO 6550‑2, ISO 6550‑3 and ISO 6550‑4, used in compression ignition (diesel) engines.
Earth-moving machinery — Safety — Part 6: Requirements for dumpers
ISO 20474-6:2008 gives the safety requirements specific to wheeled and crawler dumpers as defined in ISO 6165, including compact dumpers and compact dumpers with standing operator. It is not applicable to road‑truck‑mounted dumpers. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to earth-moving machine families, and with ISO/TS 20474-…
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Pa...
ISO/TS 19072-3:2008 defines the general minimum specifications of a type 1 three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle.
A two-way without ground variant of the pyrotechnic device/initiator harness connector assembly is also defined. All requirements apply also to the two-way design, excepted all items…
Road vehicles — Fuse-links — Part 1: Definitions and general test requirements
ISO 8820-1:2008 defines terms and specifies general test requirements for fuse-links for electrical systems of road vehicles.
ISO 8820-1:2008 is intended to be used in conjunction with other parts of ISO 8820, to which its requirements are applicable except where modified by the particular requirements of another part.
ISO 8820-1:2008 is not applicable to fuse holders used in the vehicles.
Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification
ISO 22901-1:2008 specifies the concept of using a new industry standard diagnostic format to make diagnostic data stream information available to diagnostic tool application manufacturers, in order to simplify the support of the aftermarket automotive service industry. The Open Diagnostic Data Exchange (ODX) modelled diagnostic data are compatible with the software requirements of the Modular…
Lamps for road vehicles - Performance requirements
One of a series of IEC standards for incandescent lamps to be used in headlamps, fog-lamps and signalling lamps of road vehicles.
This consolidated version consists of the third edition (2003)
and its amendment 1 (2008). Therefore, no need to order amendment in
addition to this publication.
Road vehicles — 50 ohms impedance radio frequency connection system interface — Part 1: Dimensions a...
ISO 20860-1:2008 specifies male and female connectors of the 50 ohms impedance system interface for radio frequency applications in road vehicles, and ensures communication to and within road vehicles.
It specifies dimensional and electrical requirements and characteristics required for interchange ability.
This connection system can be applied in all relevant equipment and cable connections of…
Hybrid-electric road vehicles — Guidelines for charge balance measurement
ISO/TR 11955 describes procedures of charge balance measurement to ensure necessary and sufficient accuracy of a fuel consumption test on hybrid-electric vehicles (HEV) with batteries, which is conducted based on ISO 23274.
