Earth-moving machinery — Machine-mounted audible travel alarms and forward horns — Test methods and ...
ISO 9533:2010 specifies a static test method for determining the sound output performance and alarm activation requirements of audible travel alarms and forward horns mounted on earth-moving machinery, as defined in ISO 6165, for operation on work sites and travelling on public roads. It offers objective test methodologies and performance criteria.
It is applicable only to those alarms and horns…
Road vehicles — Communication on FlexRay — Part 1: General information and use case definition
ISO 10681-1:2010 defines common requirements for vehicle systems implemented on a FlexRay communication link, as specified in the FlexRay Communications Systems Protocol Specification.
It also describes general use-cases and communication scenarios that are covered by FlexRay transport and network layer. Each use case drives specific communication capabilities and requirements of the vehicle…
Road vehicles — Communication on FlexRay — Part 2: Communication layer services
ISO 10681-2:2010 specifies the requirements for a communication protocol tailored to meet the requirements of FlexRay-based vehicle network systems as specified in the FlexRay Communications Systems Protocol Specification. As the communication protocol combines the network-layer and transport-layer functionality (OSI layers 3 and 4), this document does not explicitly distinguish between these…
Electronic fee collection — Application interface definition for autonomous systems — Part 1: Chargi...
ISO/TS 17575‑1:2010 defines the format and semantic of the data exchange between a Front End (OBE plus optional proxy) and corresponding Back Ends in autonomous toll regimes. ISO/TS 17575‑1:2010 deals with the definition of the data elements used to report charging details from the Front End to the CE and to receive data which can be used to re-configure the ongoing process of gathering charge…
Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of t...
ISO/TS 14907-1:2010 specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
ISO/TS 14907-1:2010 is restricted to systems operating within the radio emission, EMC regulations, traffic and other…
Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high...
ISO 8820-3:2010 specifies fuse-links with tabs (blade-type) Type C (medium), Type E (high current) and Type F (miniature) for use in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements and dimensions.
ISO 8820-3:2010 is applicable for fuse-links with a rated voltage of 32 V or 58 V, a current rating of less than or equal to 100 A…
Road vehicles — Calibration fluids for diesel injection equipment
ISO 4113:2010 specifies the requirements for calibration fluids, i.e. a basic fluid and a closer value (CV) fluid, intended for testing and calibrating diesel fuel injection equipment in production, in service and in laboratories. The CV calibration fluid requires a closer tolerance range for kinematic viscosity and density, and can be specified to enhance the accuracy of the calibration setting…
Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location
ISO 4513:2010 establishes the location of drivers' eyes inside a vehicle. Elliptical (eyellipse) models in three dimensions are used to represent tangent cut-off percentiles of driver eye locations. Procedures are provided to construct 95th and 99th percentile tangent cut-off eyellipses for a 50/50 gender mix, adult user population.
Neck pivot, P, points are defined to establish specific…
Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test
ISO 13674-1:2010 specifies a test schedule that addresses a particular aspect of the on-centre handling characteristics of a vehicle: the weave test. It is applicable to passenger cars in accordance with ISO 3833, and to light trucks.
Road vehicles — Passenger-car and trailer combinations — Lateral stability test
ISO 9815:2010 specifies a lateral stability test for passenger-car and trailer combinations. It is applicable to passenger cars in accordance with ISO 3833, and also to light trucks, and their trailer combinations.
The lateral stability test determines the damping characteristic of the yaw oscillation of such towing-vehicle–trailer combinations excited by a defined steering impulse. The…
