Rechercher

ISO 16844-7:2014 specifies the parameters used in the interchange of digital information between a road vehicle's tachograph system and vehicle units or a diagnostic tester, or within the tachograph system itself. The parameters are applicable for normal communication and/or diagnostic services. Parameters included in this part of ISO 16844 rely in particular on regulations stated in…

ISO 16844-6:2014 defines diagnostic communication and services for tachograph systems of road vehicles. The communication is specified both for CAN communication mode and K-line communication mode. The diagnostic services based on ISO 14229-1 and most services are common for the two communication interfaces. Interface specific implementations are specified in the respective sections.

ISO 362-1:2015 specifies an engineering method for measuring the noise emitted by road vehicles of categories M and N under typical urban traffic conditions. It excludes vehicles of category L1 and L2, which are covered by ISO 9645, and vehicles of category L3, L4, and L5, which are covered by ISO 362‑2. The specifications are intended to reproduce the level of noise generated by the principal…

The ISO 17572 series specifies location referencing methods (LRMs) that describe locations in the context of geographic databases and will be used to locate transport-related phenomena in an encoder system as well as in the decoder side. The ISO 17572 series defines what is meant by such objects and describes the reference in detail, including whether or not components of the reference are…

This part of IEC 61980 applies to the equipment for the wireless transfer of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS (Rechargeable energy storage system) and/or other on-board electrical systems in an operational state when connected to the supply network, at standard supply voltages ratings per IEC 60038 up to 1…

IEC 60810:2014 is applicable to lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. It is especially applicable to those lamps which are listed in IEC 60809. However, the standard may also be used for other lamps falling under the scope of this standard. This fourth edition cancels and replaces the third edition…

IEC 60809:2014 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as non-replaceable. This third edition cancels and replaces the second edition (1995), its Amendment 1 (1996), its Amendment 2 (2002), its Amendment 3…

ISO 15845:2014 specifies the minimum functional and safety requirements for enclosed self-propelled boarding vehicles designed for transporting and boarding/de-boarding persons with reduced mobility onto/from the main deck or upper deck of main line civil transport aircraft on which they are travelling as a passenger. The intent of ISO 15845:2014 is not to specify equipment design, but rather to…

IEC 62620:2014 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former takes precedence. (e.g. IEC 62660 series on road vehicles).…

ISO 8820-1:2014 defines terms and specifies general test requirements for fuse-links for electrical DC systems of road vehicles. This part of ISO 8820 is intended to be used in conjunction with other parts of ISO 8820, to which its requirements are applicable except where modified by the particular requirements of another part. This part of ISO 8820 is not applicable to fuse holders used in the…