Manual on Industrial Radiography
Part IIi
Chapter 9: Some Aspects of Welding Technology
9.1 Introduction
It has been well known in the field that industrial radiographers are called
upon to interpret radiographic images of components, subassemblies and
structures either at the time of manufacture or during service. This may
include a variety of specialized welding techniques. Consequently,
radiographers become not only associated with welding techniques but also
benefit by…
Manual on Industrial Radiography
Part IIi
Chapter 11: Aircraft Structures
11.1 Introduction
The radiography of aircraft structures requires that the radiographer have
general knowledge of the structure of an aircraft, the principles of flight,
the terms used to describe components and their function, and the radiographic
procedures and techniques unique to aircraft construction and maintenance.
This chapter will attempt to provide this general knowledge without…
Guide to the Selection and Use of Soaps and Detergents
1. Scope
1.1 This standard is intended for use as a guide in the correct choice of
standard products for cleaning operations in public buildings and
equipment. The standard divided into two parts as follows:
1.1.1 Part 1 contains general recommendations and precautions on the cleaning
of floors, walls and woodwork in public buildings.
1.1.2 Part 2 gives a…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
Applies to electrically powered laboratory atomic spectrometers with thermal atomization, including atomic absorption spectrometers, emission flame photometers, atomic fluorescence spectrophotometers, inductively coupled plasma spectrometers, microwave coupled plasma spectrometers, and mass spectrometers, all with thermal atomization and ionization (including tubing and connectors which are…
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie ...
S'applique aux spectromètres de laboratoire équipés d'une alimentation électrique et d'une vaporisation thermique, y compris les spectromètres à absorption atomique, les photomètres de flamme, les spectromètres à fluorescence atomique, les spectromètres à plasma couplé par induction, les spectromètres à plasma couplé par micro-onde, les spectromètres de masse, tous avec…
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 5: Classification of electromagn...
This publication is a technical report intended for guidance, not as a specification, for those who are in charge of writing immunity standards for an equipment or system. Its purpose is to classify electromagnetic environments and help improve the specification of the immunity requirements of an item containing electrical or electronic parts, and consequently obtain electromagnetic compatibility…
Compatibilité électromagnétique (CEM) - Partie 2: Environnement - Section 5: Classification des envi...
Cette publication est un rapport technique destiné à servir de guide, et non de spécification, à l'attention des rédacteurs de normes d'immunité concernant un équipement ou un système. Elle a pour objet de classer les environnements électromagnétiques afin de faciliter la spécification des exigences d'immunité applicables à des objets comprenant des parties électriques ou…
Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electr...
Applies for the connection of electrical copper conductors, rigid stranded and/or flexible, having a cross-sectional area from 35 mm2 flexible up to and including 300 mm2 and equivalent AWG/kcmil sizes with a rated voltage not exceeding 1 000 V a.c. and a frequency up to and including 1 000 Hz, and 1 500 V d.c. Has the status of a group safety publication in accordance with IEC Guide 104.
