Preface
This is the first edition of CSA Special Publication PLUS 9014, ISO 9000 Interpretations. It is a compendium of interpretations given on the ISO 9000 family of Standards and approved by the CSA Technical Committee on Quality Management (TC on QM).
The ISO 9000 family of Standards was developed by quality experts from around the world, under the auspices of the Internationa l…
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equi...
Specifies limits for harmonic current emissions applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems. The tests according to this standard are type tests. Test conditions for particular equipment are given in annex C. For systems with nominal voltages less than 220 V (…
Compatibilité électromagnétique (CEM) - Partie 3-2: Limites - Limites pour les émissions de courant ...
Définit les limites pour les émissions de courant harmonique applicables aux appareils électriques et électroniques ayant un courant d'entrée dont la valeur est inférieure ou égale à 16 A par phase et qui sont destinés à être raccordés à des réseaux publics de distribution à basse tention. Les essais effectués conformément à la présente norme sont des essais de type. Les conditions d'…
Lignes directrices sur les systèmes d'aménagement forestier durable - Critères de qualification...
1. Domaine d'application
1.1 Ce document offre des conseils relatifs aux critères de qualification pour les vérificateurs et les vérificateurs principaux de systèmes d'aménagement forestier durable. Cependant, il n'aborde pas les critères de sélection et la composition des équipes de vérification. Pour plus de renseign ements sur de tels sujets, prière de consulter la…
User Selection Guide to CSA Standard A440-98, Windows
1. Scope
1.1 Classifications and Test Requirements
Classification levels and test requirements provided within CSA Standard A440
and this Special Publication allow a purchaser or specifier to select windows
suitable to their specific climatic conditions, height of installation, type of
building, etc. The authority having jurisdiction assigns the minimum levels to
be met. All other…
Energy Performance of Windows and Other Fenestration Systems
1. Scope
1.1
This Standard applies to
(a) all windows covered by CSA Standard A440, including
(i) vertical sliding windows;
(ii) horizontal sliding windows;
(iii) tilt-and-turn windows;
(iv) casement windows, both fixed and operable;
(v) projecting (awning/hopper) windows, and
(vi) fixed windows, including fixed-window…
Chemical Test Methods for Hydraulic Cement, Supplementary Cementing Materials,
and Cementitious Hyd...
1. Scope
1.1 General
Test methods in this Standard address the chemical analysis of hydraulic cement
and supplementary cementing materials. At the discretion of the laboratory,
alternative methods demonstrated to be of acceptable precision and bias that
further satisfy the qualification criteria of Clause 3 may be used for
analysis.
1.2 Test Frequencies
Refer to Table 1 of CSA…
Shunt capacitors for a.c. power systems having a rated voltage above 660 V -
Part 2: Endurance test...
This National Standard of Canada is equivalent to International Standard IEc
871-2:1987.
1. Scope
This report applies to capacitors according to IEC Publication 871-1 and
gives the requirements for endurance testing of these capacitors.
Condensateurs shunt destinés à être installés sur des réseaux à courant
alternatif de tension assig...
La présente Norme nationale du Canada est équivalente à la Norme internationale
CEI 871-2:1987.
1. Domaine d'application
Le présent rapport s'applique aux condensateurs traités dans la Publication
871-1 de la CEI; il donne les prescriptions relatives aux essais d'endurance de
ces condensateurs.
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: Genera...
Gives definitions. Specifies marking, core identification and general requirements for the construction of cables. Appendix describes code designation of cables. This consolidated version consists of the second edition (1993), its amendment 1 (1995) and its amendment 2 (1997). Therefore, no need to order amendments in addition to this publication.