Rechercher

IEC 62612:2013+A1:2015 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: - a rated power up to 60 W; - a rated voltage of > 50 V a.c. up to 250 V a.c.; - a lamp cap as listed in IEC 62560. This first…

L'IEC 62612:2013+A1:2015 spécifie les exigences de performances, ainsi que les conditions et les méthodes d'essais, requises pour assurer la conformité des lampes à LED à dispositif de stabilisation incorporé, destinées à l'éclairage domestique et à l'éclairage général similaire, ayant: - une puissance assignée pouvant atteindre 60 W; - une tension assignée comprise entre 50…

IEC 62391-1:2015 is available as <a href="https://webstore.iec.ch/publication/23570">IEC 62391-1:2015 RLV</a> which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.<br /> <br /> IEC 62391-1:2015 applies to fixed electric double-layer capacitors (hereafter referred to as…

IEC 60317-0-4:2015 specifies general requirements of glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire. The range of nominal conductor dimensions is given in the relevant specification sheet. This third edition cancels and replaces the second edition published in 1997, Amendment 1:1999 and Amendment 2:2005. This edition constitutes a technical revision.…

L'IEC 60317-0-4:2015 spécifie les exigences générales relatives au fil de section rectangulaire en cuivre nu ou émaillé guipé de fibres de verre imprégnées de vernis ou de résine. La plage des dimensions nominales des conducteurs est donnée dans la feuille particulière concernée. Cette troisième édition annule et remplace la deuxième édition parue en 1997, l'Amendement 1:1999 et l'…

IEC TS 62257-12-1:2015(E) applies to lamps and lighting appliances for off-grid electricity systems with the following characteristics: - The power supply is AC or DC: - AC nominal voltages up to 250 V; - DC nominal voltages up to 48 V. The light source is CFL, linear fluorescent, or LED. Operation of the lamp or lighting appliance does not require any components to be supplied by the testing…

IEC 60317-31:2015 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. The range of nominal conductor dimensions covered by this standard is:<br /> - width: min.2,0 mm max.16,0 mm;<br /> - thickness: min.0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as…

IEC 60317-32:2015 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 155. The range of nominal conductor dimensions covered by this standard is:<br /> - width: min 2,0 mm max 16,0 mm;<br /> - thickness: min 0,80 mm max 5,60 mm. The specified combinations of width and thickness as well as…

IEC 60317-33:2015 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 200. The range of nominal conductor dimensions covered by this standard is:<br /> - width: min 2,0 mm max 16,0 mm;<br /> - thickness: min 0,80 mm max 5,60 mm. The specified combinations of width and thickness as well as the…

IEC 60317-31:2015 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. The range of nominal conductor dimensions covered by this standard is: - width: min.2,0 mm max.16,0 mm; - thickness: min.0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/…