Rechercher

IEC TS 60695-11-11:2016 décrit une méthode d'essai utilisée pour déterminer le flux de chaleur caractéristique pour l'allumage (CHFI) à partir d'une flamme source qui n'est pas en contact pour les matériaux utilisés dans les produits et les sous-ensembles électrotechniques. Elle donne une relation entre le temps d'allumage et le flux de chaleur incident. Une éprouvette…

IEC 62595-1-2:2016(E) gives the preferred terms, their definitions and symbols for display lighting units (DLUs) such as backlight units (BLUs) of transmissive and transflective LCDs, and frontlight units (FLUs) of reflective LCDs and electronic paper (E-paper) displays, with the object of using the same terminology when publications are prepared in different countries. This edition includes the…

IEC 62196-2:2016 applies to plugs, socket-outlets, vehicle connectors and vehicle inlets with pins and contact-tubes of standardized configurations, herein referred to as accessories. They have a nominal rated operating voltage not exceeding 480 V a.c., 50 Hz to 60 Hz, and a rated current not exceeding 63 A three-phase or 70 A single phase, for use in conductive charging of electric vehicles.…

L'IEC 62196-2:2016 s'applique aux fiches, aux socles de prise de courant, aux prises mobiles et socles de connecteurs de véhicule, à broches et alvéoles, de configurations normalisées, ci-après dénommés appareils. Ces appareils ont une tension d'emploi assignée ne dépassant pas 480 V en courant alternatif, 50 Hz à 60 Hz, et un courant assigné ne dépassant pas 63 A en triphasé ou 70…

IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310…

IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310…

IEC TS 62436:2008+A1:2016(E) It gives a guideline for the implementation of the audio and video interfaces with copy control information. This consolidated version consists of the first edition (2008) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.

ISO 10896-2:2016 specifies general safety requirements for slewing rough-terrain variable-reach trucks (hereafter known as "trucks"), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g., carriage and fork arms) is typically fitted. Fork arms and other integrated attachments are…

ISO 7396-1:2016 spécifie les exigences relatives à la conception, à l'installation, au fonctionnement, aux performances, aux essais, à la réception et à la documentation des systèmes de distribution utilisés dans les établissements de soins pour les gaz suivants: - l'oxygène; - le protoxyde d'azote; - l'air médical; - le dioxyde de carbone; - les…

ISO 7396-1:2016 specifies requirements for design, installation, function, performance, testing, commissioning and documentation of pipeline systems used in healthcare facilities for the following: - oxygen; - nitrous oxide; - medical air; - carbon dioxide; - oxygen/nitrous oxide mixtures (see Note 1); - helium/oxygen mixtures; - (*) oxygen 93; -…