Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed cap...
IEC 60384-14-2:2016 forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384-14:2013, 1.4.2, requires a declaration of design for parameters relevant to safety and indicates conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared…
Condensateurs fixes utilisés dans les équipements électroniques - Partie 14-2: Spécification particu...
L'IEC 60384-14-2:2016 particulière cadre constitue la base d'une procédure uniforme de marquage de sécurité international commun. Elle met en oeuvre le programme d'approbation pour les essais de sécurité de l'IEC 60384-14:2013, 1.4.2, nécessite une déclaration de conception pour les paramètres relatifs à la sécurité et indique les essais de conformité à réaliser sur tous les…
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnosti...
ISO 15031-3:2016 references the latest publication of SAE J1962.
On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardized connector for purposes of access to OBD information by ISO 15031‑4 compliant external test equipment. This part of ISO 15031 describes the requirements for the physical connection and associated pin usage to allow for standard access to…
Chemical sterilization of reusable medical devices in health care settings
1.1
This Standard specifies essential elements for using chemical processes to sterilize medical devices in
health care settings, with the object of achieving an adequate level of sterility assurance and minimizing
the risk of injury to health care setting personnel and patients.
Note: The term “health care setting” includes, but is not limited to, hospitals, free standing surgical centres,…
1.1
This Standard applies to commercial, industrial, and institutional electric clothes-drying equipment
intended to be used by trained or supervised personnel only, in nonhazardous locations in accordance
with the Canadian Electrical Code, Part I (CEC) on circuits having a nominal voltage not exceeding 600 V.
Note: Wherever practical, for convenience, the term ?appliance? has been used in…
Maritime navigation and radiocommunication equipment and systems -Digital interfaces - Part 450: Mul...
IEC 61162-450:2011+A1:2016(E) specifies interface requirements and methods of test for high speed communication between shipboard navigation and radiocommunication equipment as well as between such systems and other ship systems that need to communicate with navigation and radio-communication equipment. Is based on the application of an appropriate suite of existing international standards to…
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio d...
CISPR 16-1-3:2004+A1:2016 is designated a basic standard, which specifies the characteristics and calibration of the absorbing clamp for the measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. In this edition a more detailed calibration method for the…
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l�...
CISPR 16-1-3:2004+A1:2016 est une norme fondamentale qui spécifie les caractéristiques et l'étalonnage de la pince absorbante pour la mesure de la puissance perturbatrice radioélectrique dans la gamme de fréquences de 30 MHz à 1 GHz. Cette deuxième édition annule et remplace la première édition parue en 2003. Elle constitue une révision technique. Cette édition spécifie une méthode d'…
Gyromagnetic materials intended for application at microwavefrequencies - Measuring methods for prop...
IEC 60556:2006+A1:2016 describes methods of measuring the properties used to specify polycrystalline microwave ferrites in accordance with IEC 60392 and for general use in ferrite technology. These measuring methods are intended for the investigation of materials, generally referred to as ferrites, for application at microwave frequencies. It includes editorial improvements as well as…
Matériaux gyromagnétiques destinés à des applicationshyperfréquences - Méthodes de mesure des propri...
L'IEC 60556:2006+A1:2016 décrit des méthodes de mesure des propriétés utilisées pour spécifier des ferrites polycristallins pour hyperfréquences conformément à la CEI 60392 et l'utilisation générale de la technologie des ferrites. Ces méthodes de mesure sont destinées à l'étude de matériaux, les ferrites, pour les applications hyperfréquences. Elle inclut des améliorations…
