Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drive...
IEC 60335-2-103:2015+A1:2017+A2:2019 deals with the safety of electric drives for horizontally and vertically moving gates, doors, garage doors and windows for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. It also covers the hazards associated with the movement of the driven part.
Battery-operated drives and…
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and ...
This document presents the basic principles of, an introduction to, and the general influence factors for the calculation of the load capacity of spur and helical gears. Together with the other documents in the ISO 6336 series, it provides a method by which different gear designs can be compared. It is not intended to assure the performance of assembled drive gear systems. It is not intended for…
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity ...
IEC 60754-2:2011+A1:2019 specifies the apparatus and procedure for the determination of the potential corrosivity of gases evolved during the combustion of materials taken from electric or optical fibre cable constructions by measuring the acidity (pH) and conductivity of an aqueous solution resulting from the gases evolved during the combustion. The general method specified in this standard is…
Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 2: Détermi...
L'IEC 60754-2:2011+A1:2019 décrit l'appareillage et la procédure d'essai pour déterminer le potentiel de corrosivité des gaz émis pendant la combustion de matériaux prélevés sur un câble électrique ou un câble à fibre optique en mesurant l'acidité (pH) et la conductivité d'une solution aqueuse obtenue à partir des gaz dégagés pendant la combustion. La méthode générale…
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halo...
IEC 60754-1:2011+A1:2019 specifies the apparatus and procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from electric or optical fibre cable constructions. The method specified in this standard is intended for the testing of…
Essai sur les gaz émis lors de la combustion des matériaux des câbles - Partie 1: Détermination de l...
L'IEC 60754-1:2011+A1:2019 décrit l'appareillage et la procédure d'essai pour la détermination de la quantité de gaz acide halogéné, autre que l'acide fluorhydrique, émis au cours de la combustion de mélanges à base de polymères halogénés et de mélanges contenant des additifs halogénés prélevés sur un câble électrique ou à fibre optique. La présente méthode décrite dans cette…
Electromechanical elementary relays - Part 1: General and safety requirements
IEC 61810-1:2015 applies to electromechanical elementary relays (non-specified time all-or-nothing relays) for incorporation into low voltage equipment (circuits up to 1 000 V alternate current or 1 500 V direct current). It defines the basic functional and safety requirements and safety-related aspects for applications in all areas of electrical engineering or electronics, such as: general…
Household and similar electrical appliances - Safety - Part 2-116: Particular requirements for furni...
IEC 60335-2-116:2019 deals with the safety of furniture with electrically motorized parts intended for household and similar purposes, their rated voltage being not more than 250 V.
Furniture incorporating electrically motorised parts not intended for normal household use but which nevertheless may be a source of danger to the public, such as furniture intended to be used by laymen in shops,…
Appareils électrodomestiques et analogues - Sécurité - Partie 2-116: Exigences particulières pour le...
L'IEC 60335-2-116:2019 traite de la sécurité du mobilier avec des parties électriquement motorisées, pour usages domestiques et analogues, dont la tension assignée n'est pas supérieure à 250 V.
Les mobiliers intégrant des parties à motorisation électrique non destinés à un usage domestique normal, mais qui néanmoins peuvent constituer une source de danger pour le public (le mobilier…
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+A1:2013+A2:2019 provides details of the test apparatus to be used for measuring smoke emission when electric or optical fibre cables are burnt under defined conditions, for example, a few cables burnt horizontally. The light transmittance (lt) under flaming combustion and smouldering conditions can be used as a means of comparing different cables or complying with specific…
