Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC 7811-2:2001 (third edition, 2001-02-01). 1 Scope This part of ISO/IEC 7811 is one of a series of standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange. This part of ISO/IEC 7811 specifies requirements for a low…

Applies to empty enclosures, prior to the incorporation of switchgear and controlgear components by the user, as supplied by the enclosure manufacturer. This standard specifies definitions, classifications, characteristics and test requirements of enclosures to be used as part of switchgear and controlgear assemblies in accordance with the IEC 60439 series, the rated voltage of which does not…

1. SCOPE 1.1 This standard provides the dimensional and performance requirements for safety, durability and structural adequacy of interconnecting panels and panel supported components such as work surfaces, drawers, and storage units. Panels may have the capability for management of electrical communications wiring as well as acoustical properties. 1.2 This standard also provides for…

1. SCOPE 1.1 This standard applies to task chairs for office work with Visual Display Terminals (VDT) by providing dimensional and adjustment requirements. This standard also defines test methods for measuring chairs and assessing their performance. 1.2 This standard also provides for dimensional and adjustment requirements that respect gerally acceptable ergonomic guidelines such as those…

1. SCOPE 1.1 This standard applies to two types (type 11 and type 15) of naval distillate fuel for marine (naval) applications such as gas turbine power plants, high-and medium-speed internal combustion engines of the compression-ignition type, and boilers. Fuel produced to this standard is not intended for use in aircraft turbine engines. 1.2 Type 11 is intended for equipment operating…

Applicable to safety-related electronic systems using a closed transmission system for communication purposes. Gives the basic requirements needed in order to achieve safety-related communication between safety-related equipment connected to the transmission system. Not applicable to existing systems which had already been accepted prior to the release of this standard. However, as far as is…

ISO 18413 specifies the content of an inspection document that includes both the cleanliness requirement for the specified part or component and the inspection method to be used for evaluating its cleanliness level. The cleanliness requirement and inspection method shall be established and agreed upon by the parties involved. ISO 18413 is applicable to the wetted surfaces of any fluid power…

ISO 6257:2002 specifies methods for sampling and preparing samples prior to testing of binder pitch used in the manufacture of electrodes for the electrolytic production of aluminium. These methods are applicable to grades of pitch in liquid or solid form, the latter having softening points higher than 30 °C (determined according to the method specified in ISO 5940), in bulk, or in a number of…

1. Scope 1.1 This standard sets forth requirements for ionization-type and photoelectric-type detectors, rated at 300 V or less, to be employed in ordinary indoor locations in accordance with the following: A Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524; B National Building Code of Canada; C National Fire Code of Canada. 1.2 A smoke detector (e.g.…

1. Scope 1.1 This Standard sets forth requirements for smoke-alarms, single-station and multiple-station type, rated 120 V or less, intended for open area protection in ordinary indoor locations. 1.2 A smoke-alarm, as defined by these requirements, is a self-contained unit which consists of an assembly of electrical components including a smoke chamber, alarm-sounding appliance, and provision…