Rechercher

1. SCOPE 1.1 This standard applies to two grades of aviation gasoline. 1.2 The aviation gasoline is intended for use in internal combustion aircraft engines with spark ignition. 1.3 Limitations for Use - Operators should consult their aircraft manual for the appropriate grade. 1.4 The testing and evaluation of a product against this standard may require the use of materials and/or equipment…

ISO 9562:2004 specifies a method for the direct determination of an amount of usually 10 micrograms per litre in water of organically bound chlorine, bromine and iodine (expressed as chloride) adsorbable on activated carbon. This method is applicable to test samples with concentrations of inorganic chloride ions of less than 1 g/l. Samples with higher concentrations are diluted prior to analysis…

ISO 6347:2004 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for the guidance of the consumer prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.

ISO 22803:2004 gives the requirements for a technical file on the evaluation of the chemical, physical, mechanical, biological and clinical aspects and behaviour of membrane materials, whether resorbable, partially resorbable or non-resorbable, which are used a) for guided tissue regeneration in oral and maxillofacial surgery to correct a morphological defect or abnormality, b) in contact with…

ISO 14560:2004 specifies, for quality levels expressed as nonconforming items per million items, procedures for estimating the quality level of a single entity (e.g. a lot) and, when the production process is in statistical control, for estimating the process quality level based on evidence from several samples. Procedures are also specified for using this information when selecting a suitable…

1. PURPOSE AND SCOPE 1.1 This method contains five accelerated tests for determining the colourfastness to washing of textile fabrics, threads and yarns. Each test is designed to produce in a single treatment the colour change to be expected after five average home or commercial washings under one of five commonly used sets of conditions. 1.2 The five tests contained in this method are:…

Describes the use of generic cabling for customer premises, as specified in international standard ISO/IEC 11801, for connection to wireless access points. The customer premises may encompass one or more buildings or may be within a building that contains more than one enterprise. This TR, intended to guide new installations and renovations, specifies an ISO/IEC compliant implementation…

ISO 18649:2004 provides methodology for the evaluation of results from dynamic tests and investigations on bridges and viaducts. It complements the procedure for conducting the tests as given in ISO 14963 and considers -- the objectives of the dynamic tests, -- the techniques for data analysis and system identification, -- the modelling of the bridge, and -- evaluation of the measured data. The…

1. SCOPE 1.1 This standard applies to a heavy-metal-free, water-borne primer. 1.2 The primer is suitable for use on steel and light-alloy surfaces aboard ships and on other marine structures exposed to intermittent immersion in salt water. The corrosion-inhibiting primer may be used either alone or with a topcoat. 1.3 The testing and evaluation of a product against this standard may…

1. SCOPE 1.1 This test method covers the determination of total sulphur concentrations in diesel fuel and similar middle distillates such as kerosene and aviation jet fuel in the range from 0.010 to 0.500% by mass (100 to 5000 mg/kg), using energy dispersive X-ray fluorescence spectrometry. 1.2 The testing and evaluation of a product against this method may require the use of materials and/or…