Rechercher

IEC 60939-2-2:2004 forms the basis for a uniform procedure for a common Safety Mark. It implements the approval schedule for the safety test described in IEC 60939-2, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

IEC 60939-2-2:2004 forms the basis for a uniform procedure for a common Safety Mark. It implements the approval schedule for the safety test described in IEC 60939-2, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

1. SCOPE 1.1 This standard applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark ignition engines under a wide range of climatic conditions. 1.2 Gasoline specified in this standard may contain methyl tertiary butyl ether (MTBE) or other aliphatic ethers. 1.3 Provincial and federal regulations control some parameters…

1. PURPOSE AND SCOPE 1.1 This method determines the dimensional change of textile fabrics or garments, likely to occur in domestic laundering procedures. The fabric specimen or garment is subjected to an appropriate combination of specified washing, drying and restoration procedures.(1) 1.2 Seven washing, six drying and three restoration procedures are included as follows: 1.2.1…

ISO 16247:2004 specifies a helium test method for detecting and localising gas leaks in the exhaust systems of road vehicles equipped with an internal combustion engine, in order to improve the quality of exhaust gas measurements. In doing so, it completes the requirements of ISO 3929, applicable regulations and, depending on the leak rate for detection, ISO 13556. The method is particularly…

IEC 60384-14-2:2004 forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384-14, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design. <br…

forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384 14, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

IEC 60384-14-2:2004 forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384-14, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design. This…

ISO 806:2004 specifies a method for the determination of loss of mass on heating of aluminium oxide at 300 °C and further loss of mass on ignition at 1 000 °C. By industry convention, these mass losses are often referred to as "moisture (MOI)" and "loss on ignition (LOI)" respectively. This method is suitable for calcined alumina in the range 0,2 % to 5 % loss of mass at 300 °…

Defines VHSIC Hardware Description Language (VHDL)accurately. Its primary audiences are the implementor of tools supporting the language and the advanced user of the language. Other users are encouraged to use commercially available books,tutorials,and classes to learn the language in some detail prior to reading this standard. These resources generally focus on how to use the language,rather…