Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 81 - 90 de 1418
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precisio...
This document provides a)    a discussion of alternative experimental designs for the determination of trueness and precision measures including reproducibility, repeatability and selected measures of intermediate precision of a standard measurement method, including a review of the circumstances in which their use is necessary or beneficial, and guidance as to the interpretation and application…
Éditeur :
ISO
Statut :
Publié
Date de publication :
2023-06-27
Code(s) de l'ICS :
03.120.30; 17.020
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
IEC 62208:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 62208:2023 edition 3.0 and the previous IEC 62208:2011 edition 2.0. Furthermore, comments from IEC SC 121B experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the…
Éditeur :
IEC
Statut :
Publié
Date de publication :
2023-05-31
Code(s) de l'ICS :
29.130.20
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
IEC 62208:2023 applies to empty enclosures, as provided by the enclosure manufacturer, prior to the incorporation of switchgear and controlgear components by the assembly manufacturer. This document specifies general definitions, classifications, characteristics and test requirements of enclosures to be used as part of switchgear and controlgear assemblies (e.g. in accordance with the product…
Éditeur :
IEC
Statut :
Publié
Date de publication :
2023-05-31
Code(s) de l'ICS :
29.130.20
Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers
Scope 1.1 This standard presents methodologies for characterizing and quantifying coarse, fine, and ultrafine particles and volatile organic compound (VOC) emissions from operating three-dimensional (3D) printers under normal conditions of use in defined indoor environments including classroom, office, and residential scenarios. 1.2 This method primarily applies to the emissions of particles…
Éditeur :
UL
Statut :
Norme
Date de publication :
2023-05-25
Code(s) de l'ICS :
13.040; 25.030
Guidance for use of radiation-sensitive indicators
This document covers procedures for using radiationsensitive indicators (referred to hereafter as indicators) in radiation processing. These indicators may be labels, papers, inks or packaging materials which undergo a visual change when exposed to ionizing radiation (1-5). The purpose for using indicators is to determine visually whether or not a product has been irradiated, rather than to…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2023-05-15
Code(s) de l'ICS :
17.240
Ships and marine technology — Procedure for testing the performance of continuous monitoring TRO sen...
This document provides a method to ensure the performance of continuous monitoring TRO sensors, which can be installed in a BWMS or elsewhere in a ship, taking into consideration environmental factors associated with shipboard conditions, such as high salinity, vibration, variation in humidity and temperature, and predictable sea conditions. This document is intended for use by BWMS manufacturers…
Éditeur :
ISO
Statut :
Publié
Date de publication :
2023-05-10
Code(s) de l'ICS :
47.020.99
CSA ISO 17664-1:23
1 Scope This document specifies requirements for the information to be provided by the medical device manufacturer for the processing of critical or semi-critical medical devices (i.e. a medical device that enters normally sterile parts of the human body or a medical device that comes into contact with mucous membranes or non-intact skin) or medical devices that are intended to be sterilized.…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2023-04-30
Code(s) de l'ICS :
11.080.01
Processing of health care products — Information to be provided by the medical device manufacturer f...
1 Scope This document specifies requirements for the information to be provided by the medical device manufacturer for the processing of non-critical medical devices not intended to be sterilized (i.e. a medical device that is intended to come into contact with intact skin only or a medical device not intended for direct patient contact). This includes information for processing prior to use or…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2023-04-30
Code(s) de l'ICS :
11.080.01
Portable engine fuelling system for marine use
1 Scope 1.1 Inclusions This Standard sets forth a set of minimum performance requirements for portable engine fuelling systems (PEFS) with a rated capacity of not more than 32 L (8.45 US gal), designed to be connected to gasoline-fueled engines aboard boats by flexible fuel lines that can be disconnected for refilling and portability. It applies to PEFS intended to be used with gasoline…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2023-04-30
Code(s) de l'ICS :
55.140; 47.080
Ton containers for the transportation of dangerous goods
Scope 1.1 Organization and content This National Standard of Canada sets out requirements for the design, manufacture, maintenance, qualification, selection and use of ton containers used in the handling, offering for transport or transport of dangerous goods of Classes 2, 3, 4, 5, 6.1, 8 and 9. This standard does not apply to large means of containment that are used exclusively for non-…
Éditeur :
ONGC
Statut :
Norme
Date de publication :
2023-03-31
Code(s) de l'ICS :
13.300; 13.300

Spacer