STANDARD FOR THERMAL INSULATION - SPRAY APPLIED RIGID POLYURETHANE FOAM, MEDIUM DENSITY -APPLICATION
SCOPE
This Standard outlines requirements for the installation of spray applied rigid polyurethane foam, medium density. The material can be installed as thermal insulation, air barrier, vapour barrier or any combination of these three applications. The application requirements are for the installation of spray applied rigid polyurethane cellular plastic whether applied on a building site or…
STANDARD FOR THERMAL INSULATION – BEAD-APPLIED ONE COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: ...
1. SCOPE
1.1 This Standard specifies the requirements and test methods for bead-applied one
component polyurethane foam used as an insulating air sealant for both building and nonbuilding
applications. This Standard covers bead-applied one-component polyurethane air
sealant foam whether applied on a building site or in a prefabrication (manufacturing) process.
The one-component…
STANDARD FOR THERMAL INSULATION – BEAD-APPLIED TWO COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 2: ...
1. SCOPE
1.1 This Standard specifies the requirements for the installation of thermal insulating
bead-applied two-component polyurethane foam used as an insulating air sealant (including a
component within an air barrier system) for both building and non-building applications. The
material is installed as air sealant foam in holes, cracks or gaps.
1.2 These are requirements for both the…
Space systems — Dynamic and static analysis — Exchange of mathematical models
ISO 14954:2005 normalizes the exchange of mathematical models between spacecraft contractors (SCC) and launch service providers (LSP). It identifies standard methods for modelling the dynamic behaviour of both launch vehicles (LV) and spacecraft (SC) particularly when they are coupled prior to launch and during the early moments of the launch phase.
In standard mode, the delivered models…
Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-herme...
Establishes a standard procedure for determining the preconditioning of non-hermetic surface mount devices (SMDs) prior to reliability testing. The test method defines the preconditioning flow for non-hermetic solid-state SMDs representative of a typical industry multiple solder reflow operation. These SMDs should be subjected to the appropriate preconditioning sequence described in this standard…
ISO 9554:2005 specifies the general characteristics of fibre ropes and their constituent materials. ISO 9554:2004 is intended to be used in conjunction with the standards for the individual types of fibre rope, which cover the physical properties and specific requirements for that particular product type.
ISO 9554:2005 also gives some information on the use of fibre ropes and also on their…
Industrial automation systems and integration — Product data representation and exchange — Part 1164...
ISO/TS 10303-1164:2004 specifies the application module for
Product as individual.
The following are within the scope of
ISO/TS 10303-1164:2004:
representation of the information to identify an actual product;
representation of the…
Textile Test Methods Textiles - Determination of Twist in Yarns - Direct Counting Method
This National Standard of Canada is equivalent to International Standard ISO 2061:1995.
1. Scope
1.1 This International Standard specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method.
1.2 This International Standard is applicable to:
a) single…
Information Technology - 3,81 mm WideMmagnetic Tape Cartridge for Information Interchange - Helical ...
This National Standard of Canada is equivalent to International Standard ISO/IEC 17462:2000.
1 Scope
This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format…
This National Standard of Canada is equivalent to International Standard ISO/IEC 7810:2003.
1 Scope
This International Standard is one of a series of standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange.
This International Standard specifies the physical characteristics of…
