Surface chemical analysis — Handling of specimens prior to analysis
ISO 18117:2009 gives guidance on the handling of and the containers for specimens submitted for surface chemical analysis. It is intended for the user of surface analysis services as an aid in understanding the special sample handling requirements of surface chemical analysis techniques, particularly the following: Auger electron spectroscopy (AES), secondary-ion mass spectrometry (SIMS) and X-…
Effective sterilization in health care facilities by the steam process
Scope
1.1
This Standard specifies essential elements in implementing a program for using steam to sterilize medical devices in health care facilities, with the object of achieving an adequate level of sterility assurance and minimizing the risk of injury to health care facility personnel and patients.
Notes:
(1) The term "health care facility" includes, but is not limited to, hospitals…
Effective sterilization in health care facilities by the ethylene oxide process
Scope
1.1
This Standard specifies essential elements in implementing a program for using ethylene oxide to sterilize medical devices in health care facilities, with the object of achieving an adequate level of sterility assurance and minimizing the risk of injury to health care facility personnel and patients.
Notes:
(1) The term "health care facility" includes, but is not limited to,…
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential ...
IEC 60601-2-2:2009 specifies particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories. This particular standard amends and supplements IEC 60601-1 (third edition, 2005): Medical electrical equipment - Part 1: General requirements for basic safety and essential performance. This fifth edition cancels and…
Aerospace fluid systems — Elastomer seals — Storage and shelf life
ISO 27996:2009 is applicable to the general requirements for data recording procedures, packaging, and storing of elastomeric seals and seal assemblies which include an elastomeric element prior to the seal being assembled into hardware components.
The requirements for packaging are an integral part of the controlled storage procedure and provide a means of positive product identity from the time…
Clinical dosimetry — Beta radiation sources for brachytherapy
ISO 21439:2009 specifies methods for the determination of absorbed-dose distributions in water or tissue that are required prior to initiating procedures for the application of beta radiation in ophthalmic tumour and intravascular brachytherapy]. Recommendations are given for beta-radiation source calibration, dosemetry measurements, dose calculation, dosemetric quality assurance, as well as for…
ISO 9927-1:2009 specifies the inspections to be carried out on cranes as defined in ISO 4306-1. It does not cover the inspections carried out prior to the first use of the crane.
C22.4 No. 1-09
Objective-based industrial electrical code
Preface
This is the first edition of CSA C22.4 No. 1, Objective-based industrial electrical code. Permission to use extracts from IEC 60364-1:2005 was provided by Standards Council of Canada, in co-operation with IHS Canada. No further reproduction is permitted without prior written approval from Standards Council of Canada.
0…
1. SCOPE
1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting
entirely of petroleum-derived hydrocarbons, naturally occurring non-hydrocarbons and additives as specified
herein. Kerosene-type aviation turbine fuels are distillates having a minimum flash point of 38°C.
1.1.1 The two grades differ only in freezing point. Grade JET A…
Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatme...
ISO 2082:2008 specifies the requirements of electroplated coatings of cadmium with supplementary treatments on iron and steel. It includes information that is to be supplied by the purchaser to the electroplater, and describes coating requirements, including those for heat treatment before and after electroplating.
It is not applicable to coatings applied
to sheet, strip or wire in the non-…
