Textiles — Determination of twist in yarns — Direct counting method
ISO 2061:2010 specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method
ISO 2061:2010 is applicable to
single yarns (spun and filament),
plied yarns, and
cabled yarns.
Separate procedures are given for each type of yarn. The method is designed…
1. SCOPE
1.1 This standard applies to two types of diesel fuel, Type A and Type B, that are suitable for use in off-road and
stationary diesel engines.
1.2 Both types of fuel may be used in off-road1 diesel-powered equipment in services involving relatively high loads,
for example, industrial equipment and heavy mobile equipment used in construction.
1.2.1 Type A is intended for use when…
Preface
This is the ninth edition of CSA C22.3 No. 1, Overhead systems, one of a series of Standards issued under the Canadian Electrical Code, Part III. It supersedes the previous editions, published in 2006, 2001, 1987, 1985, 1979, 1976, and 1970, and the original edition, which was published as a series of five Standards in 1959, 1953, 1947, and 1940.
Scope
1.1
This Standard applies to…
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by...
ISO 3210:2010 specifies methods of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution.
ISO 3210:2010 consists of the following two methods.
Method 1: assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after…
Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation c...
ISO 2143:2010 specifies a method of estimating the loss of absorptive power of anodic oxidation coatings that have undergone a sealing treatment, by dye absorption after acid pretreatment.
The method is suitable for use as a production control method and is applicable to anodic oxidation coatings which may be subjected to weathering or aggressive environments, or where resistance to staining is…
ISO 8217:2010 specifies the requirements for petroleum fuels for use in
marine diesel engines and boilers, prior to appropriate treatment before use.
The specifications for fuels in ISO 8217:2010 can also be applicable to fuels
for stationary diesel engines of the same or similar make and type as those used
for marine purposes.
ISO 8217:2010 specifies four categories of distillate fuel, one…
Environmental monitoring programs at Class I nuclear facilities and uranium mines and mills
Scope
1.1 Facilities
1.1.1 Types of facilities
1.1.1.1
This Standard addresses the design and operation of EMPs for Class I nuclear facilities and uranium mines and mills. These facilities include
(a) nuclear reactors;
(b) uranium mines, mills, refineries, and conversion plants;
(c) uranium fuel fabrication plants;
(d) isotope-processing facilities;
(e) particle accelerators; and…
Selection and use of rigid sterilization containers
1 Scope
1.1
This Standard defines essential elements for the selection, use, and maintenance of rigid sterilization
containers. The selection criteria include minimum construction and performance requirements to help
health care facilities choose products that are appropriate for their intended use.
1.2
This Standard applies to the following types of rigid sterilization containers:
(a)…
Requirements for measurement standards for high intensity therapeutic ultrasound (HITU) devices
IEC/TR 62649:2010(E) is relevant to the measurement and specification of ultrasound fields intended for medical therapeutic purposes. Lithotripsy and physiotherapy are excluded, since there are existing International Standards for these applications. IEC/TR 62649:2010 establishes:
- topics where there is a consensus that the development of International Standards would benefit the industries and…
Safety of toys — Part 3: Migration of certain elements
ISO 8124-3:2010 specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys.
Maximum acceptable levels are specified for the migration of the elements listed above from the following toy materials:
coatings of paints…