Rechercher

1 Scope 1.1 Inclusions This Standard sets forth a set of minimum performance requirements for portable engine fuelling systems (PEFS) with a rated capacity of not more than 32 L (8.45 US gal), designed to be connected to gasoline-fueled engines aboard boats by flexible fuel lines that can be disconnected for refilling and portability. It applies to PEFS intended to be used with gasoline…

Scope 1.1 Organization and content This National Standard of Canada sets out requirements for the design, manufacture, maintenance, qualification, selection and use of ton containers used in the handling, offering for transport or transport of dangerous goods of Classes 2, 3, 4, 5, 6.1, 8 and 9. This standard does not apply to large means of containment that are used exclusively for non-…

ISO 9924-1:2016 specifies a thermogravimetric method for the determination of the total organic content, carbon black content and ash in vulcanizates and uncured compounds. The loss in mass at 300 °C is an approximate guide to the volatile-matter content of the compound. The method is suitable for the analysis of rubber compounds and vulcanizates containing the following rubbers occurring alone…

1 Scope 1.1 This Standard provides the physical property requirements and test methods to determine the material properties for High density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for other purposes in building and non-building applications in both site-built construction and prefabrication (manufacturing) facilities. 1.2 The spray polyurethane foam…

Scope 1.1 This Standard outlines requirements for the installation of closed cell spray applied rigid polyurethane foam, high density. The material can be installed for thermal insulation or for other purposes in building and non-building applications. The application requirements are for the installation of spray applied rigid polyurethane cellular plastic whether applied on a building site…

1 Scope 1.1 Organization and content This standard applies to the design, manufacture, maintenance, qualification, inspection and marking of tank cars and the selection and use of large means of containment or transport units used in the handling, offering for transport or transporting of dangerous goods by rail of classes 2, 3, 4, 5, 8, 9 and division 6.1. This standard does not apply to…

IEC 62281:2019+AMD1:2021+AMD2:2023 specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this document do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different…

IEC 60115-2:2023(E) is applicable to fixed low-power film resistors with termination leads for use in electronic equipment, which are typically assembled in through-hole technology (THT) on circuit boards. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is…

This National Standard of Canada applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for outdoor use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its…

This National Standard of Canada applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for indoor use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its…