Rechercher

ISO 12219-1:2012 describes and specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in vehicle cabin air. There are three measurements performed: one (for VOCs and carbonyl compounds) during the simulation of ambient conditions (ambient mode) at standard conditions of…

ISO 16000-19:2012 describes the measurement strategy for the detection of fungi in indoor environments. ISO 16000-19:2012 describes suitable sampling and analysis methods together with a description of the applicability and the interpretation of the measurement results to maximize the comparability of the measured data obtained for a given measurement objective. It does not include details on…

ISO/TS 23810:2012 covers the activities performed by perfusionists during preoperative extracorporeal circulation (ECC) equipment setup prior to cardiopulmonary bypass (CPB), extracorporeal membrane oxygenation (ECMO), cardiopulmonary support (CPS), left or right heart bypass (LHB/RHB) or venovenous (VV) extracorporeal support for liver transplantation. Its requirements can serve as a checklist…

1. SCOPE 1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates with a minimum flash point of 38°C. 1.1.1 The two grades differ only in freezing point.…

1. SCOPE 1.1 This standard applies to two grades of aviation turbine fuel (military grades F-34 and F-44) consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as herein. 1.1.1 Grade F-34 is a kerosene-type aviation turbine fuel, and grade F-44 is a high-flash kerosene-type aviation turbine fuel. Kerosene-type aviation turbine fuels…

1. SCOPE 1.1 This standard applies to suit systems to be worn by helicopter passengers during transportation over water where thermal protection may be required. 1.2 The primary function of a suit system meeting this standard is to provide the helicopter passenger protection from the effects of cold water during the initial hours of immersion. 1.3 Helicopter passenger transportation suit…

ISO 26082-1:2012 specifies a method for determining the resistance of all forms of leather to visible soiling through repeated contact with soiled objects. It provides a physical pretreatment routine for leathers that may be vulnerable to loss of soiling resistance while in service, prior to conducting further tests such as cleaning.

Scope 1.1 This Standard specifies essential elements in implementing a program for using chemicals to sterilize medical devices in health care facilities. Such chemicals can be vapour, gaseous, or liquid and are delivered in validated concentrations and quantities in defined sterilizers. The body of this Standard contains requirements that are common to all chemical sterilization processes,…

This standard establishes the test method, criteria, and apparatus to evaluate a hydrogen fueling station as it relates to achieving the protocol specified in SAE TIR J2601 – 2010, Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles, for fueling, and the SAE TIR J2799, 70 MPa Compressed Hydrogen Surface Vehicle Fueling Connection Device and Optional Vehicle to Station…

IEC 62337:2012 defines specific phases and milestones in the commissioning of electrical, instrumentation and control systems in the process industry. By way of example, it describes activities following the "completion-of-erection" milestone of the project and prior to the "acceptance-of-the-plant" phase by the owner. Such activities need to be adapted for each type of…