Ships and marine technology — Protective coatings and inspection method — Part 4: Automated measurin...
ISO 16145-4:2013 describes the characteristics of an automated measuring method by using a conductivity meter for the assessment of the total surface density of various water-soluble salts on steel surfaces prior to coating applications for dedicated sea water ballast tanks, void spaces of bulk carriers and oil tankers, and cargo oil tanks of crude tankers in compliance with PSPC stipulated by…
Welding for aerospace applications — Resistance spot and seam welding
ISO 16338:2013 specifies requirements for resistance spot and seam welding for aerospace applications.
It does not apply if resistance welding is simply an intermediate operation and does not affect the quality of the end product, for example when tacking basic parts prior to assembly with another process.
Resistance welding of dissimilar material group combinations is not covered by ISO 16338:…
Information technology — International string ordering and comparison — Method for comparing charact...
1 Scope
This International Standard defines the following.
- A reference comparison method. This method is applicable to two character strings to determine their
collating order in a sorted list. The method can be applied to strings containing characters from the full
repertoire of ISO/IEC 10646. This method is also applicable to subsets of that repertoire, such as those of
the different ISO/…
Monolithic (unshaped) refractory products — Part 2: Sampling for testing
ISO 1927-2:2012 gives guidance on the sampling of monolithic (unshaped) refractory materials for the purpose of inspection and testing for quality and general information on the reduction and treatment of samples prior to testing. It covers all materials formulated as monolithic refractory materials.
Standard for Exterior Insulation and Finish Systems (EIFS) – Materials and Systems
1.1 This Standard outlines requirements for Exterior Insulation and Finish Systems (EIFS), used in
combination with a drained air space as an exterior wall cladding system. It also outlines requirements for
water resistive barrier systems (WRBs) that can be used with EIFS.
1.2 The EIFS wall cladding system is comprised of thermal insulation boards, an adhesive for attachment
of the thermal…
Standard for Exterior Insulation and Finish Systems (EIFS) - Installation of EIFS Components and Wat...
1.1 This Standard contains requirements for the installation of Exterior Insulation and Finish Systems
(EIFS) that meet the material and system requirements of CAN/ULC-S716.1 and the design requirements
of CAN/ULC-S716.3.
1.2 This standard applies to the installation of the EIFS components and to the installation of the water
resistive barrier system. It does not apply to the installation of…
Standard for Exterior Insulation and Finish Systems (EIFS) - Design Application
1.1 This Standard contains requirements for the design, selection and application of exterior cladding
utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1,
and for the interfaces between EIFS and other building components.
1.2 This Standard applies to both new installations and to retrofit installations of EIFS on both high-rise
and low-rise…
1. SCOPE
1.1 This standard applies to one type of naphtha fuel suitable for use in catalytic-type heaters and in naphtha pressureappliances
such as stoves, lanterns, heating units and blowtorches.
1.1.1 The specified limiting values in this standard are present to allow the use of this naphtha fuel in catalytic heaters.
The use of other types of fuel in catalytic heaters such as fuels with a…
Textile test methods Tearing strength — Trapezoid method
1 Scope
This method determines the tearing strength of woven and nonwoven fabrics by the trapezoid procedure.
Two procedures for the calculation of tearing strength are given, one for woven fabrics and the other for nonwoven
fabrics. The two procedures do not usually give the same result.
The testing and evaluation of a product against this method may require the use of materials and/or…
Ships and marine technology — Vessel machinery operations in polar waters — Guidelines
ISO/PAS 18215:2012 provides guidance to ship design and operational personnel (crew) on the critical issues to consider regarding machinery, prior to and during vessel operations in the extreme conditions of the earth's polar regions.
It is intended to supplement the IMO Code for Ships Operating in Polar Waters, and the IACS UR "I", Requirements Concerning Polar Class.