Rechercher

ISO 3438:2013 specifies the dimensions of subland twist drills with Morse taper shanks and cylindrical shanks for holes prior to tapping screw threads. The drills are designed to produce holes prior to tapping metric threads (coarse pitch series) over a selected range of: M8 to M30 for subland twist drills with Morse taper shanks; M3 to M14 for subland twist drills with cylindrical shanks. ISO…

1. SCOPE 1.1 This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel components and require preheating (Types 4, 5 and 6). 1.2 The heating fuel oils covered by this standard are intended for use in oil burning equipment to generate…

1. SCOPE 1.1 This standard applies to two types of ultra low-sulphur diesel fuel, Type A and Type B, suitable for use in highspeed diesel engines, in on-road and off-road applications and in select medium speed applications. 1.2 Type A is intended for use in selected applications or when ambient temperatures require better low-temperature properties than Type B. 1.3 Fuel meeting this standard may…

1. SCOPE 1.1 This standard describes two grades of propane used only for fuel purposes. These grades consist mainly of C3 compounds. 1.1.1 Grade 1 is intended for use in internal combustion engines and for general industrial and commercial fuel applications. Grade 1 maintains a minimum octane quality by limiting concentrations of low-octane components (see footnote 6). Note: The…

ISO 75-2:2013 specifies three methods, using different values of constant flexural stress, which can be used for the determination of the temperature of deflection under load of plastics (including filled plastics and fibre-reinforced plastics in which the fibre length, prior to processing, is up to 7,5 mm) and ebonite: method A, using a flexural stress of 1,80 MPa; method B, using a flexural…

1 Scope This method assesses the combustion resistance of mattresses when in contact with a lighted cigarette. This method covers the resistance of mattresses to ignition only by a burning cigarette and does not relate to their resistance to any other source of ignition or fire condition. The testing and evaluation of a product against this standard may require the use of materials and/or…

Scope 1.1 General 1.1.1 This Standard provides requirements for the commissioning of health care facilities and all related building systems. It applies to new facilities, and renovations and additions to existing facilities. This Standard is based on CSA Z320, Building commissioning, with additions as appropriate to address the special requirements for health care facility commissioning. 1…

ISO 16446:2013 specifies a universal method for the joining of oil spill containment booms with dissimilar connectors through the use of a standard adaptor with prescribed mating specifications. ISO 16446:2013 does not intend to replace the design of existing connectors. ISO 16446:2013 does not purport to address all of the safety concerns, if any, associated with its use. It is the…

Scope 1.1.1 This standard applies to newly produced pool heaters (see Part IV, Definitions), hereinafter referred to as pool heaters or appliances, constructed entirely of new, unused parts and materials, for heating non-potable water stored at atmospheric pressure, such as water in swimming pools, spas, hot tubs and similar applications: a. For use with natural gas; b. For use with…

1 SCOPE 1.1 This standard outlines requirements for a site quality assurance program (SQAP) for the on-site installation of spray applied polyurethane foam (SPF). As the installation of the material is dependent on the installer, a site quality assurance program is required to provide assurance of compliance to material and installation standards to the property owner, authority having…