Rechercher

Scope 1.1 This Standard specifies the physical property requirements and test methods to determine the material properties for light density, open cell spray applied semi-rigid polyurethane foam, used as a thermal insulation for building applications, whether applied on a building site or in a prefabrication (manufacturing) facility. 1.2 The spray polyurethane foam system installer site…

1 Scope Scope This part of IEC 60079 gives the specific methodology for the assessment and testing, and requirements for marking of electrical equipment, parts of electrical equipment and Ex components with special protection “s”. This part of IEC 60079 applies to • electrical equipment employing a method of protection not covered by any existing standard in the IEC 60079 series, •…

This document in its entirety defines the general requirements and specifications for fuels used in marine diesel engines and boilers, prior to onboard fuel handling (storage, settling, centrifuging, filtration, heating) before use. For the purposes of this document, the term “fuels” comprises of the following: —    hydrocarbons from petroleum crude oil, oil sands and shale oil; —    synthetic…

This document provides requirements on the management of waste generated during the operation of inland navigation vessels, including handling, collection, separation, marking, treatment, and storage on board of the vessel. It also describes the ship-to-shore interface and the delivery of waste from the vessel to the reception station. Small crafts or vessels can use this document to improve…

This document addresses ultrasonic test systems implementing array probes, for contact technique (with or without wedge) or for immersion technique, with centre frequencies in the range of 0,5 MHz to 10 MHz. This document provides methods and acceptance criteria for determining the compliance of the complete system (see 3.2). Its purpose is for the verification of the correct operation of the…

This document specifies the safety requirements and measures for single spindle vertical moulding machines (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. This document deals with all significant hazards, hazardous situations and events as…

Scope 1.1 Organization and content This standard prescribes packaging for handling, offering for transport and transport of Explosives (Class 1). This standard consists of four parts and three annexes. Part 1 specifies general requirements for the selection and use of packaging including application, packaging provisions and re-use of packaging. Part 2 specifies requirements for UN…

Scope 1.1 Organization and content This standard sets out the requirements for designing, manufacturing and marking of UN standardized large packagings and for selecting and using large packagings for the transportation of dangerous goods of Classes 3, 4, 5, 6.1, 8 and 9. This standard consists of two parts and two annexes. Part I contains the requirements for the design, manufacture and…

Scope 1.1 These requirements cover products (e.g. repeater, transmitter, receiver, signal booster components, remote annunciators and operational consoles, power supply, and battery charging system components) used for emergency responder communication enhancement systems installed in a location to improve wireless communication at that location. 1.2 In the United States – These requirements…

The proposed project is a revision of ISO/IEC/IEEE 24748-2:2018, Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes). There are no scope changes. ISO/IEC/IEEE 24748-2 is a guideline for the application of ISO/IEC/IEEE 15288. It addresses system, life cycle, organizational, project, and process,…