Rechercher

1. PURPOSE AND SCOPE 1.1 This standard describes a physical method of quantitative analysis. The method may be used to analyze mixtures of fibres that differ in density by at least 0.15 g/mL. The method may also be used when chemical methods of analysis are not suitable. The solvents used must not change the density of fibres. 1.2 The accuracy of the method depends upon sufficient difference…

This National Standard of Canada is equivalent to International Standard ISo 7776-1986. 1. Scope and field of application This International Standard defines an application of the following HDLc Standards: ISO 3309, ISO 4335, ISO 7478, and ISO 7809. When there is difficulty in the interpretation of a reworded requirements from one of the other International Standards, the original…

This National Standard of Canada is equivalent to International Standard ISO 7478-1987. 1 Scope and Field of Application This International Standard specifies multilink procedures where a multiplicity of parallel data links at the data link layer are used to provide a variable bandwidth data link between network layer entities. The multilink procedures (MLP) exist as a new upper sublayer…

This National Standard of Canada is equivalent to International Standard ISo 8885-1987. 1. Scope and field of application The principal use of the XID frame is to exchange data link information between two or more HDLC stations. For the purpose of this International Standard, data link information shall include any and all essential operational characteristics such as identification…

Prior to each test the wheelchair shall have been conditioned for at least 24 hours according to ISO 554. The effects of rain and changes of temperature are to be determined in accordance with IEC 529 and IEC 68-2-14.

Describes the procedures to be used for the safe reprocessing of reusable medical and surgical supplies prior to sterilization or disinfection.

1. SCOPe 1.1 This standard applies to a high-density felt with not less than 50% animal fibre content, for packing, padding and crating, where a firm, semi-hard material is required. This felt is not intended for use in ammuniation components. 1.2 For more detailed information on intended uses, see par. 7.2. 1.3 This standard may require the use of materials and/or equipment that…

Applies to a mixture of ingredients compounded for use on floors, prior to sweeping, to reduce dust.

1. SCOPe 1.1 This standard applies to unpigmented sealer intended primarily for use on resilient and nonresilient floors other than those of wood or cork. 1.2 Intended Uses - The sealers to this standard are intended for use in sealing resilient and nonresilient surfaces prior to the use of maintenance finishes. Type 1 solvent-based sealer should be used…

Specifies the requirements for ISO surface profile comparators which are intended for visual and tactile comparison of steel substrates. The document also includes definitions of the terms used for surface roughness characteristics. Comparators are for use on site prior to the application of coating materials or protective paintings of surfaces.