1. Scope
1.1 This Standard specifies the requirements for a material consisting of
alkaline salts and chlorine- or nonchlorine- bearing compounds suitable
for use in mechanical dishwashing equipment.
1.2 Material produced in accordance with this standard is intended for use
in mechanical dishwashing machines with soft or hard water. The
material is…
Intermediate Bulk Containers for the Transortation of Dangerous Goods
1. Scope
1.1 This standard applies to the design, manufacture and use of intermediate bulk containers (IBCs) for the transportation of dangerous goods classed as flammable, oxidizer, organic peroxides, poisonous, corrosive, or Class 9 dangerous goods as defined by the Transportation of Dangerous Goods (TDG) Regulations. Sections 4, 5 and 6 contain the testing (design) and manufacturing…
1. Scope
1.1 This standard applies to high-flash type aviation turbine fuel consisting entirely of hydrocarbon compounds, unless otherwise specified.
1.2 This standard describes a military grade fuel normally used in naval operations whose product quality parameters are influenced by international Military Standardization Agreements.
1.3 The testing and evaluation of a product against…
1. Scope
1.1 This standard applies to three grades of aviation gasoline consisting
entirely of hydrocarbons except as otherwise specified herein.
1.2 This standard describes a product intended for use in internal
combustion aircraft engines with spark ignition.
1.3 Operators should refer to their aircraft manual for the appropriate
grade.
1.4…
Cylinders for dissolved acetylene — Periodic inspection and maintenance
Specifies the minimum requirements for periodic inspection and maintenance to verify the integrity of acetylene cylinders for further service, regardless of the method of manufacture of the shell. Does not exclude the application of additional national requirements. Does not exempt the filler of an acetylene cylinder from the obligation to carry out an external visual examination prior to each…
Construction and Maintenance of Tank Car Tanks and Selection and Use of Tank
Car Tanks, Portable Ta...
1. SCOPe
1.1 This Standard specifies requirements for the construction and
maintenance of single and multi-unit tank car tanks. It also includes
requirements for the selection, use, handling and filling of single and
multi-unit tank car tanks, portable tanks, tight sift-proof covered
hopper cars and other bulk containers for the transportation in bulk…
Textile Test Methods
Flame Resistance - 45° Angle Test - One Second Flame Impingement
1. PURPOSE AND SCOPE
1.1 This method determines the flame spread properties of a textile
material when a specimen is supported at an angle of 45° and a flame is
applied to its upper surface for 1 s.
1.2 This method does not apply to textile products that cannot be tested
because of size and/or shape such as shoe laces, textile floor
coverings,…
1. Scope
1.1 This standard specifies the chemical requirements for a liquid foaming
shampoo concentrate used for both general cleaning and spot cleaning of
colourfast carpets and upholstery that are not damaged by water alone.
1.2 The testing and evaluation of a product againts this standard may
require the use of materials and/or equipment that could be…
1. Scope
1.1 This standard applies to mechanical content, coated offset paper used
for face and back offset litho printing. This paper may not be
suitable for use where permanence is a requirement. If permanence is a
requirement, users should refer to the appropriate standard for
permanent paper. A Canadian standard for paper permanence is in the…
1. Scope
1.1 This standard applies to polish designed to remove tarnish from, and to
produce a lustre on brass, copper, other yellow-copper alloys and
chrome.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety…