1. Scope
1.1 This specification provides requirements for hog bristle brushes of the
type known as sash brushes for sash and trim work.
1.2 The testing and evaluation of a product against this specification may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects
associated…
Flat Brushes with Nylon or Polyester Filaments for Paint, Varnish, Enamel and
Lacquer
1. Scope
1.1 This specification provides requirements for flat brushes with tapered
polyester or nylon filaments for the application of paint, varnish,
enamel and lacquer. It does not apply to special types of brushes such
as sash tools (CGSB specification 22.3) and stencilling brushes.
1.2 Brushes made with nylon filaments are particularly suitable for use…
1. Scope
1.1 This specification applies to plastic garbage bags for domestic and
commercial uses.
1.2 Bags to this specification are intended for use as receptacles for
household, office and light industrial garbage and common waste. They
are not intended for food packaging, food storage or biohazardous
waste.
1.3 The testing and evaluation of a…
Etch Primer (Pretreatement Coating) for Steel and Aluminum
1. Scope
1.1 This standard applies to etch primer used as a pretreatment or tie-coat
on clean, dry, metal surfaces, prior to the application of a succeeding
coating system. This coating is used to improve the adhesion of the
coating.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or…
1. Scope
1.1 This standard applies to a polarized media air filter used for the
removal of airborne particulate matter, which enter the air streams in
heating, air-conditioning and ventilation systems, and self-contained
air cleaning systems.
1.2 This filter is intended for residential and commercial use.
1.3 The testing and evaluation of a product against…
Methods of Testing Petroleum and Associated Products
Sulfates in Uninhibited Ethylene Glycol
1. Scope
1.1 This method is used to determine the amount of sulfate in uninhibited
ethylene glycol coolants.
1.2 The testing and evaluation of a product against this method may require
the use of materials and/or equipment that could be hazardous. This
document does not purport to address all the safety aspects associated
with its use. Anyone…
1. Scope
1.1 This standard applies to work suit systems that:
- reduce thermal shock upon entry into cold water;
- delay the onset of hypothermia during immersion in cold water;
- provide acceptable flotation and minimize the risk of drowning;
- do not impair the wearer's ability to perform his normal working
duties.
1.2…
Plastic Jugs, Fibreboard Boxes and Pallets for Export of Oil as Food Aid
1. Scope
1.1 This standard applies to 5 L plastic jugs intended to be used for
packaging of edible oil for export as food aid. It specifies
requirements for the design, material, performance, filling and marking
of the jugs. It also specifies the requirements for material,
construction, closure, performance and marking of fibreboard boxes and
inserts…
Fibreboard Boxes for Export of Canned Fish as Food Aid
1. Scope
1.1 This standard applies to fibreboard boxes for packaging of canned fish
for export as aid. It specifies required material, construction,
closure, performance and marking.
1.2 This standard is mainly intended to be used in food aid contracts by
the Canadian International Development Agency (CIDA).
1.3 The testing and evaluation of a product…
1. Scope
1.1 This standard specifies the requirements for two types of
detergent-resistant water-emulsion floor polish suitable for general
application on most floors other than wood and on sealed wood floors.
It should not be used on unsealed wood, cork or magnesite floors. The
floor finish may be maintained by spray buffing techniques using…
