Rechercher

1. Scope 1.1 This standard applies to a durable water-resistant enamel suitable for exterior and interior use on wooden and concrete floors. 1.2 The enamel is for use as a finish coat on wooden floors, porches, other wooden surfaces, and fully cured (minimum of one year) concrete floors subject to wear by normal foot traffic. 1.3 The testing and…

1. PURPOSE AND SCOPE 1.1 This method determines, in a single treatment, the dimensional changes (shrinkage or stretch) that may occur in a fabric as a result of relaxation of strain, during any of the following treatments: commercial preshrinking of wool or part-wool fabrics (sponging) dry cleaning in solvent systems containing dissolved water¹…

1. SCOPe 1.1 This standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts, rolls, boards and sheets. Where facings are used, they shall be either permeable or vapour retarding membranes, as defined in Table 1 for Types 2 and 3, respectively. This standard does not permit the application of kraft paper facings on batts and rolls. It also…

1. Scope 1.1 This standard specifies requirements for the construction and maintenance of single and multi-unit tank car tanks. It also includes requirements for the selection, use, handling and filling of single and multi-unit tank car tanks, portable tanks, tight sift-proof covered hopper cars and other bulk containers for the transportation in bulk by rail of dangerous goods of Classes 2,…

1. SCOPE 1.1 This standard specifies criteria for assessing the efficacy of antimicrobial agents intended for use on environmental surfaces in health care facilities and premises where food is prepared, manufactured or stored, and for use on medical devices. Such agents are classified as drugs under the Food and Drugs Act and Regulations (see par. 3.1…

Scope O80.0-1.1 This Standard sets forth requirements for materials, analysis of materials, and operational practices for pressure and thermal impregnation for the chemical preservation of wood. 1.2 The recommendations made in this Standard are based solely on the efficacy of the preservative in any specific application. As preservatives and their uses are regulated by government…

1. Scope 1.1 This standard applies to two grades of wide cut aviation turbine fuel consisting entirely of hydrocarbon compounds, except as otherwise specified. Wide cut aviation fuels are naphtha/kerosine blends having a wide boiling range, low flash, and low freezing point properties. 1.2 Grade JET B describes a fuel that is used in commercial operations. F-40 is a NATO code number for…

1. SCOPE 1.1 This standard applies to task chairs for office work with Visual Display Terminals (VDT) by providing dimensional requirements and methods for measuring chairs and assessing their performance. 1.2 This standard describes the chair types for three levels of single-shift use: Type 1 - Use of the computer and of other equipment is the primary task of the user,…

1. Scope 1.1 This standard applies to sealed insulating glass (IG) units used in windows, doors and curtain walls in building envelopes. It includes requirements for the testing of samples for the integrity and durability of the unit's hermetic seal and if applicable, gas concentration. 1.2 The requirements contained herein are applicable to…

1. Scope 1.1 This standard provides dimensional and performance requirements for safety, durability and structural adequacy of freestanding components of office desk products. 1.2 Quantities and dimensions used in this standard are given in metric with yard/pound equivalents shown in brackets where appropriate. The metric units shall be regarded…