1. SCOPE
1.1 This standard applies to cold-curing, two-component, coal tar-epoxy
coatings intended for the protection of clean concrete, metal and wood surfaces
that are exposed to extremely corrosive conditions.
1.2 The coal tar-epoxy coatings are suitable for application in thick coats by
spray (airless and conventional) and roller, and for touch up by brush. They
are intended for…
Textile Test Methods - Resistance of Woven Fabrics to Seam Slippage
1. PURPOSE AND SCOPE
1.1 This method is for evaluating the resistance to slippage of weft yarns on
warp yarns, or warp yarns on weft yarns, at the seam of a woven fabric.
1.2 The method is particularly applicable to apparel and furnishing fabrics¹
but is not intended for use on heavy industrial fabrics.
1.3 The method specifies two seams, one intended for use with apparel fabrics…
Textile Test Methods - Burning Behaviour - Selection of Methods
1. PURPOSE AND SCOPE
1.1 This method describes the burning behaviour tests from the CAN/CGSB-4.2
No. 27 Series and recommends which should be used to determine the burning
behaviour of different products under various defined conditions.
1.2 The testing and evaluation of a product against this method may require
the use of materials and/or equipment that could be hazardous. This…
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium
Density, Material -...
1. SCOPe
1.1 This Standard specifies the requirements and test methods for
spray-applied rigid polyurethane cellular plastics used as thermal insulation
in buildings and other applications, when applied either "on site" or in a
manufacturing facility.
1.2 The spray-applied rigid polyurethane cellular plastic thermal insulation
shall not be used when the continuous service…
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium
Density, Installer&...
1. Scope
1.1 This standard provides procedures to installers of spray-applied rigid
polyurethane cellular plastic used as thermal insulation in building
construction and other applications, whether applied either "on site" or in a
manufacturing facility.
1.2 The procedures include selection of chemical components, application,
quality control and documentation of the…
Methods of Testing Petroleum and Associated Products - Benzotriazole or
Tolyltriazole in Aircraft D...
1. Scope
1.1 This method covers the determination of benzotriazole or tolyltriazole in
the range of 0.4 to 0.6% by mass in aircraft deicing-defrosting fluids.
1.2 The testing and evaluation of a product against this method may require
the use of materials and/or equipment that could be hazardous. This document
does not purport to address all the safety aspects associated with its use…
1. SCOPE
1.1 This standard applies to automotive fuel methanol (M85) that contains 15%
unleaded gasoline. It is intended for use in automotive engines under a wide
range of climatic conditions.
1.2 The fuel methanol shall only be used in equipment specifically designed
for its use. Some fuel systems may not be fully compatible with fuel produced
to this standard. Users are advised…
1. Scope
1.1
This Standard sets forth methods for both new installation and replacement
installation of factory-assembled windows and exterior doors that are intended
for vertical installation in small buildings primarily used for residential
occupancy.
1.2
This Standard provides minimum requirements that will help to ensure the
installation of windows in an effective manner, such…
1. SCOPe
1.1 This standard applies to diemakers', machinists' and cylinder squares used
in determining angles when manufacturing parts. Carpenters' squares are not
included in this standard.
1.2 The squares shall be graduated in the International System of Units (SI)
and/or the Yard/Pound System. If a value for a measurement given in this
standard is followed by an equivalent…
1. SCOPe
1.1 This standard applies to vernier, dial and digital type calipers and
gauges for measuring external, internal, depth and height dimensions.
1.2 The calipers and gauges shall be graduated in the International System of
Units (SI) and/or the Yard/Pound System. If a value for a measurement given in
this standard is followed by an equivalent parenthesized value in other units,
the…