Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-4-6: 1996 (first edition, 1996-03). This section of International Standard IEC 1000-4 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz.…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-69: 1997 (second edition, 1997-02), with Amendment 1:2000. 1 Scope This clause of part 1 is applicable except as follows: Addition: This standard applies to electrical motor-operated vacuum cleaners and includes appliances and stationary equipment specifically designed for wet suction, dry suction, or…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-40: 1995 (third edition, 1995-04), with Amendment 1:2000. 1 Scope This clause of part 1 is replaced by: This part of IEC 335 applies to the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers incorporating sealed motor-compressors, their maximum rated…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-34: 1999 (third edition, 1999-10). 1 Scope This clause of part 1 is replaced by the following. This standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-30: 1996 (third edition, 1996-04), with Amendment 1:1999. 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions),hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with liquified petroleum (propane); c. direct vent appliances for manufactured home (USA only) or mobile home OEM installation…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10613-7:1994. 1 Scope This International Standardized Profile is applicable to interworking units concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI base standards that collectively provide a Network Relay function for the connectionless-mode…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10168-1:1997. 1 Scope This part of ISO/IEC 10168 specifies a test suite structure and test purposes for the Session protocol, as defined in ISO/IEC 8327-l except for the symmetric synchronize and for the data separation functional units. This part of ISO/IEC 10168 does not specify how the conformance…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13241:1997. 1 Scope This International Standard specifies the signalling protocol for the support of the Route Restriction Class (RRC) additional network feature (ANF-RRC) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated…

1. Scope 1.1 Scope and object 1.1.1 This Standard applies to service-entrance, feeder, and branch-circuit busways and associated fittings rated at 600 V or less, 6 000 A or less, and intended for use in accordance with the Canadian Electrical Code, Part 1 (CE Code, Part 1), the National Electrical Code (NEC), ANSI/NFPA 70, and the Mexican Standard for Electrical installations (utility),…