Rechercher

1. Introduction CSA Standard B619 (referred to from this point forward as #the standard# or #B619#) was developed to address the unique requirements of the trucking industry. It was designed to provide assurances to stakeholders (such as insurance companies and federal and provincial regulators) that the carrier is committed to complying with all transportation safety requirements. The…

This National Standard of Canada is equivalent to International Standard IEC 61965:2000. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to…

This National Standard of Canada is based on International Standard IEC 60335-2-82:1999 (first edition, 1999-11). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric personal service machines and amusement machines for commercial use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-9:1996, (second edition, 1996-10). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard specifies the particuar requirements for the safety of DOSEMETERS used in medical practice in the PATIENT ENVIRONMENT for RADIOTHERAPY…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-11:1997, (second edition, 1997-08). 1 Scope and Object This clause of the General Standard applies as follows: 1.1 Scope Addition: aa) This Particular Standard specifies requirements for the safety of GAMMA BEAM THERAPY EQUIPMENT intended for RADIOTHERAPY in human medical practice and includes EQUIPMENT…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-24:1998, first edition, 1998-02. 1 Scope and object This clause of the General Standard and this clause of the Collateral Standard IEC 60601-1-2 apply, except as follows: 1.1* Scope Addition: This Particular Standard specifies the requirement for INFUSION PUMPS, INFUSION CONTROLLERS, SYRINGE PUMPS and PUMPS…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-46:1998, (first edition, 1998-06). 1.1 Scope Addition: This Particular Standard specifies safety requirements for OPERATING TABLES, as defined in 2.12.101, whether or not having electrical parts, including TRANSPORTERS, as defined in 2.12.104, used for the transportation of the table top to or from the base or…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8481:1996. 1 Scope This International Standard describes an arrangement for interconnection of Data Terminal Equipment (DTE), without intermediate Data Circuit-terminating Equipment (DCE), in terms of electrical, mechanical, and functional characteristics. This International Standard applies to DTEs with…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14474:1998. 1 Scope This International Standard is a part of the functional requirements for the Private Integrated Services Network (PISN) and defines the functions and procedures that are required by Private Integrated Services Network exchanges (PINXs) and the intervening network (IVN) in order to…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15049:1997. 1 Scope This International Standard specifies the Supplementary Services Advice of Charge (SS-AOC), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. SS-AOC is a set of supplementary services…