Rechercher

1.1 SCOPE 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall be…

1 Scope 1.1 These requirements cover humidifiers rated 600 V or less, and intended to be used in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and the Rules of the Canadian Electrical Code (CEC), Part 1, C22.1. 1.2 These requirements cover humidifiers intended for residential and commercial use. This includes humidifiers of the centrifugal atomizing type,…

This National Standard of Canada is equivalent to International Standard ISO 14971:2000. 1 Scope This International Standard specifies a procedure by which a manufacturer can identify the hazards associated with medical devices and their accessories, including in vitro diagnostic medical devices, estimate and evaluate the risks, control these risks and monitor the effectiveness of the…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-27:2000 (first edition, 2000-08). This part of IEC 61000 is a basic EMC (electromagnetic compatibility) publication. It considers immunity tests for electric and/or electronic equipment (apparatus and system) in its electromagnetic environment. Only conducted phenomena are considered, including immunity…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60335-2-51: 1997 (second edition, 1997-02). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of stationary electric circulation pumps intended for use in heating systems or in service water systems, having a rated power input not exceeding300 W, their rated voltage is not…

1. Introduction CSA Standard B619 (referred to from this point forward as #the standard# or #B619#) was developed to address the unique requirements of the trucking industry. It was designed to provide assurances to stakeholders (such as insurance companies and federal and provincial regulators) that the carrier is committed to complying with all transportation safety requirements. The…

This National Standard of Canada is equivalent to International Standard IEC 61965:2000. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to…

This National Standard of Canada is based on International Standard IEC 60335-2-82:1999 (first edition, 1999-11). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric personal service machines and amusement machines for commercial use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-9:1996, (second edition, 1996-10). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard specifies the particuar requirements for the safety of DOSEMETERS used in medical practice in the PATIENT ENVIRONMENT for RADIOTHERAPY…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-11:1997, (second edition, 1997-08). 1 Scope and Object This clause of the General Standard applies as follows: 1.1 Scope Addition: aa) This Particular Standard specifies requirements for the safety of GAMMA BEAM THERAPY EQUIPMENT intended for RADIOTHERAPY in human medical practice and includes EQUIPMENT…