Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-17:1999 (first edition, 1999-06), including Amendment 1:2001. 1 Scope This part of IEC 61000 defines test methods for immunity to ripple at the d.c. input power port of electrical or electronic equipment. This standard is applicable to low-voltage d.c. power ports of equipment supplied by external…

This National Standard of Canada is based on International Standard CEI/IEC CISPR 22:1997 (third edition, 1997-11). 1 Scope and object This publication applies to ITE as defined in 3.1. Procedures are given for the measurement of the levels of spurious signals generated by the ITE and limits are specified for the frequency range 9 kHz to 400 GHz for both class A and class B equipment. No…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-16:1998 (first edition, 1998-01), including Amendment 1:2001. 1 Scope This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a…

This National Standard of Canada is based on International Standard CEI/IEC 60730-1:1999, (third edition, 1999-04). 1 Scope and normative references 1.1 In general, this standard applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use…

1.1 Scope 1.1.1 This standard applies to newly produced gas food service equipment providing coverage for ranges and unit broilers, baking and roasting ovens, counter appliances, deep fat fryers, kettles, steam cookers, steam generators, (see Part IV, Definitions) hereinafter referred to as either (1) "appliances," constructed entirely of new, unused parts and materials for use in food…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-23:1999, (second edition, 1999-12). 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of TRANSCUTANEOUS PARTIAL PRESSURE MONITORING EQUIPMENT, as defined in 2.…

This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for vertical rails and vertical lifelines which incorporate a sliding-type fall arrester. When connected to a full-body harness as specified in ISO 10333-1, vertical rails and vertical lifelines which incorporate a sliding-type fall arrester…

1 Scope Bi-national standard, with UL 1565 1.1 This standard applies to those metallic and nonmetallic devices used for positioning - which may include bundling and securing - or to a limited extent supporting cable, wire, conduit, or tubing of a wiring system in electrical installations, to reduce the risk of fire, electric shock, or injury to persons. This standard applies to, but is not…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with liquified petroleum (propane); c. Direct vent appliances for manufactured home (USA only) or mobile home OEM…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-1-1:2000. 1 Scope This standard applies to the safety of MEDICAL ELECTRICAL SYSTEMS, as defined in 2.201. It describes the safety requirements necessary to provide protection for the PATIENT, the OPERATOR and surroundings.