Rechercher

1.1 Scope 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall be…

This National Standard of Canada is equivalent to International Standard ISO/TR 10017:2003 (second edition, 2003-05-15). 1 Scope This Technical Report provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. This is done by…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-47:2001 (first edition, 2001-07). 1.1 Scope Addition: This Particular Standard specifies the particular safety requirements for AMBULATORY ELECTROCARDIOGRAPHIC SYSTEMS, as defined in 2.101. Within the scope of this standard are systems of the following types: a) systems that provide continuous recording and…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-43:2000 (first edition, 2000-06). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for prolonged RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES. Its scope…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-44:2001 (second edition, 2001-06). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT for COMPUTED TOMOGRAPHY (CT SCANNERS). It includes safety requirements for the X-RAY GENERATOR, and those where HIGH…

This National Standard of Canada is based on International Standard ISO 15078:1998 (first edition, 1998-07-01). 1 Scope This International Standard specifies the operational pattern for log loader controls. Two alternative two-lever systems are specified. This International Standard applies to two-lever control systems for grapple-type log loaders used in mobile and self-propelled…

This National Standard of Canada is based on International Standard CEI/IEC 60871-1:1997 (second edition, 1997-10). 1 Scope and object This part of IEC 60871 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60 Hz. This part of IEC…

This National Standard of Canada is based on International Standard ISO 10079-2:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies safety and performance requirements for manually powered medical suction equipment intended for oro-pharyngeal suction. It covers equipment operated by foot or by hand or both (see Figure 1). Non-electrical suction equipment which may be…

This National Standard of Canada is based on International Standard ISO 10079-3:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies safety and performance requirements for medical suction equipment powered from a vacuum or pressure source (see Figure 1). In particular it applies to connections for pipelines and Venturi attachments. Suction equipment with components…

This National Standard of Canada is based on International Standard CEI/IEC 60065:2001 (seventh edition, 2001-12). 1.1 Scope 1.1.1 This International Safety Standard applies to electronic apparatus designed to be fed from the MAINS, from a SUPPLY APPARATUS, from batteries or from REMOTE POWER FEEDING and intended for reception, generation, recording or reproduction…