Rechercher

1 Scope 1.1 This Standard applies to 60 to 250 °C single- or multiple-conductor, jacketed or unjacketed, integral or non-integral cables and single or multiple coaxial cables for telephone and other communication circuits such as voice, data, and audio for on-premise customer systems. These cables may contain one or more optical fibre members. For the purpose of this Standard, a coaxial cable or…

1.1 This Standard shall apply to egress door securing and releasing devices to perform the function of holding a door in the closed position and releasing the door to permit free egress when operated. Egress door securing and releasing devices are considered ancillary devices and are not an integral part of the fire alarm system. 1.2 This Standard covers requirements for egress door securing and…

This National Standard of Canada is based on International Standard CEI/IEC 61936-1:2002. 1 Scope This part of IEC 61936 provides, in a convenient form, common rules for the design and the erection of electrical power installations in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use…

This National Standard of Canada is based on International Standard IEC 61400-1:2007. 1 Scope This part of IEC 61400 specifies essential design requirements to ensure the engineering integrity of wind turbines. Its purpose is to provide an appropriate level of protection against damage from all hazards during the planned lifetime. This standard is concerned with all subsystems of wind turbines…

ISO 13790:2008 gives calculation methods for assessment of the annual energy use for space heating and cooling of a residential or a non-residential building, or a part of it, referred to as “the building”. This method includes the calculation of: the heat transfer by transmission and ventilation of the building zone when heated or cooled to constant internal temperature…

This National Standard of Canada is based on International Standard IEC 60601-1:2005. 1.1 * Scope This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereafter referred to as ME EQUIPMENT and ME SYSTEMS. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME…

This National Standard of Canada is based on International Standard ISO 18777:2005. 1 Scope IEC 60601-1:1988, Clause 1, applies except as follows: Amendments (add at end of 1.1): 1.1 This International Standard specifies requirements for the safety and essential performance of transportable liquid oxygen systems which are used as a supply source for oxygen therapy. These devices usually consist…

This National Standard of Canada is based on International Standard ISO 18779:2005. 1 * Scope IEC 60601-1:1988, Clause 1, applies except as follows: Amendment (add at end of 1.1): 1.1 This International Standard specifies requirements for the safety and essential performance of portable devices that supply the flow of oxygen or oxygen mixtures during therapy (e.g. long term oxygen…

This National Standard of Canada is based on International Standard CEI/IEC 61400-2:2006. 1 Scope This part of IEC 61400 deals with safety philosophy, quality assurance, and engineering integrity and specifies requirements for the safety of Small Wind Turbines (SWTs) including design, installation, maintenance and operation under specified external conditions. Its purpose is to provide the…

ISO/PAS 30000:2008 specifies requirements for a management system to enable a ship recycling facility to develop and implement procedures, policies and objectives in order to be able to undertake safe and environmentally sound ship recycling operations in accordance with national and international standards. The management system requirements take into account the relevant legal requirements,…