Rechercher

1 Scope 1.1 This Standard applies to the design, installation, inspection, repair, and maintenance of a fuel storage and delivery system installed in an on road vehicle for use with compressed natural gas (CNG). This includes a fuel system on a self-propelled vehicle for the provision of motive power. Note: This Standard is intended to cover the fuel storage and delivery system as defined in…

1.1 General 1.1.1 This Standard provides guidelines for the commissioning of buildings and all energy and domestic water related building systems. It applies to new construction only for Part 3 buildings, as specified in the National Building Code of Canada (NBC). It does not apply to equipment and systems installed by the owner or others after building completion. 1.1.2 This Standard is intended…

<!-- NEW -->IEC 60335-2-58:2017 is available as <a href="https://webstore.iec.ch/publication/62203">IEC 60335-2-58:2017 RLV</a> which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.<br /> <br /> IEC 60335-2-58:2017 deals with the safety of electrically operated…

IEC 60335-2-58:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60335-2-58:2017 deals with the safety of electrically operated dishwashing machines for washing plates, dishes…

IEC 60335-2-58:2017 deals with the safety of electrically operated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles, with or without means for water heating or drying, not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. These…

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of powered floor treatment machines intended for commercial indoor or outdoor use for the following applications: – scrubbing, – wet or dry pick-up, – polishing and dry buffing, – application of wax, sealing products and powder based detergents, – shampooing, – stripping, grinding and…

This clause of Part 1* is replaced by the following. * For the purposes of this Standard, the term “Part 1” means “CAN/CSA-C22.2 No. 60335-1 (second edition)/ UL 60335-1 (sixth edition)”. The machines covered in this Standard are intended for floors with an artificial surface and used for the following applications: a) sweeping; b) scrubbing; c) wet or dry pickup; d) polishing; e) application of…

ISO 21307:2017 establishes general principles regarding the procedure used in the construction and quality assessment of butt fusion jointing of polyethylene (PE) piping system components specified in accordance with relevant ISO standards. These components are installed in accordance with the relevant codes of practice, national regulations or industry guidance. Specifically, this document…

1.1 This Standard applies to newly produced Type 1 clothes dryers (see Clause 3, Definitions), hereinafter referred to as dryers, constructed entirely of new, unused parts and materials: a) for use with natural gas; b) for use with manufactured gas; c) for use with mixed gas; d) for use with propane gas; e) for use with LP gas-air mixtures; and f) for mobile home installation (see…

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of sealed (hermetic and semi-hermetic type) MOTORCOMPRESSORS, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to MOTOR-COMPRESSORS tested…