Rechercher

Classes A1a and B1a porcelain (as defined in ISO 13006) are now manufactured in much larger formats than previously available and are increasingly being used as an external cladding material for buildings. Classes A1b, A11a, and AIIb extruded ceramics (as defined in ISO 13006) are not covered by the scope of this document. These materials, when specifically developed for external façade…

Scope This National Standard of Canada determines the flame spread properties of a textile product when a specimen is supported at an angle of 45° and a flame is applied to its surface for 1 s. It also describes the dry cleaning and laundering procedures for removing non-permanent flame-retardant treatments applied to textile products. The testing and evaluation of a product against this method…

1 Scope 1.1 General This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that compresses natural gas for vehicles and dispenses directly into a) the vehicle natural gas fuel storage system, referred to as a residential fuelling appliance (RFA); or b) the vehicle’s activated carbon adsorbents-based adsorbed natural gas (ANG) fuel storage…

1 Scope 1.1 General This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that compresses natural gas for vehicles and dispenses directly into a) the vehicle natural gas fuel storage system, referred to as a vehicle fuelling appliance (VFA); or b) the vehicle’s activated carbon adsorbents-based adsorbed natural gas (ANG) fuel storage…

ISO 10303-242 specifies the application protocol for Managed model based 3d engineering. The following are within the scope of ISO 10303-242: products of automotive, aerospace and other mechanical manufacturers and of their suppliers, including parts, assemblies of parts, tools, assemblies of tools, and raw materials; engineering and product data for the purpose of long-term archiving and…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR CONDITIONERS, and DEHUMIDIFIERS incorporating motor-compressors and HYDRONIC FAN COILS UNITS, their maximum RATED VOLTAGES being not more than 250 V for single phase appliances and 600 V for all other appliances. PARTIAL…

1 Scope 1.1 Purpose This Standard addresses issues related to the safety of human allogeneic and autologous cells of lymphohematopoietic origin used for transplantation and includes quality system requirements. This Standard includes aspects of safety for potential and actual donors and recipients, personnel, and others who might be exposed to or affected by the transplant of…

1 Scope 1.1 General 1.1.1 The Standard aims to specify minimum requirements for the design and operation of Industrial Internet of Things (IIoT) devices to meet requirements for security, safety, confidentiality, integrity, and availability. NOTE: As a National Standard of Canada, this is a voluntary standard. It only applies to the organizations that decide to adopt the Standard and…

This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c) leak testing (hydraulic pressure tests excluded); d) magnetic testing; e) penetrant testing; f) radiographic testing; g) strain gauge testing; h) thermographic…

IEC 60335-2-40:2022 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 60335-2-40:2022 EXV includes the content of the references made to IEC 60335-1:2010+AMD1:2013+AMD2:2016 CSV. IEC 60335-2-40:2022 deals with the…