Rechercher

Scope 1.1 This Standard applies to systems and equipment used to capture and evacuate plume. It applies to all settings where such systems and equipment are used, including, but not limited to, the following: a) surgical facilities; b) dental clinics; c) medical offices; d) veterinary facilities; e) laboratories and other research and testing facilities; f) cosmetic…

1 PURPOSE AND SCOPE This standard specifies the test method to determine the relation between the water content and the dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a 2,495 kg rammer dropped from a height of 305 mm. Three methods are used to determine this relation (see Chapter 5). NOTE — The laboratory compaction test methods described in this…

1 PURPOSE AND SCOPE This standard specifies the test method to determine the relation between the water content and the dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a 4,536 kg rammers dropped from a height of 457 mm. Three methods are used to determine this relation (see Chapter 5). NOTE — The laboratory compaction test methods described in…

ISO 6914:2013 describes three methods for the measurement of the change of stress in a test piece at a given elongation for the purpose of determining the ageing characteristics of a rubber. Method A is intended for measurement under continuous strain conditions. Method B is the preferred method for measurement under intermittent strain conditions. In the case of both methods A and B, a…

ISO 16474-3:2013 specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass. The coatings are exposed to different types of fluorescent UV lamps under controlled environmental conditions (temperature,…

ISO 16474-4:2013 specifies methods for exposing specimens to open-flame carbon-arc lamps in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight or to daylight filtered through window glass. The specimens are exposed to filtered open-flame carbon-arc light under controlled conditions (temperature, humidity…

ISO 16474-1:2013 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing paints and varnishes to laboratory light sources. Information about such performance requirements is required only by producers of artificial…

ISO 16474-2:2013 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight or to daylight filtered through window glass. The specimens are exposed to filtered xenon-arc light under controlled conditions (temperature, humidity and/or wetting). Various…

ISO 7206-6:2013 specifies test methods and the fatigue performance for the endurance properties, under specified laboratory conditions, of the neck region of stemmed femoral components of total hip joint prostheses and stemmed femoral components used alone in partial hip joint replacement. It is applicable to modular and non-modular designs made of metallic or non-metallic materials. It also…

CISPR 20:2006+A1:2013 applies to television broadcast receivers, sound broadcast receivers and associated equipment intended for use in the residential, commercial and light industrial environment. Describes the methods of measurement and specified limits applicable to sound and television receivers and to associated equipment with regard to their immunity characteristics to disturbing signals.…