The purpose of the measuring method is to determine the residual camber height and length as a function of the load ("flattening test"). Gives some essential informations related to the parameters "contact load" and "standard camber length". Applies to cross-country skis of size 130 cm and longer.
Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic ...
The specified method applies to pieces of glass, preferable flat but if necessary curved, but from articles of laboratory glassware. Sample pieces are subjected to an aqueous hydrochloric acid solution, and the amount of alkali metal oxides extracted per unit area is determined as a measure of the acid resistance. Apparatus, reagents, and procedure are specified.
Calibration specimens — Stylus instruments — Types, calibration and use of specimens
Specifies the characteristics of specimens for the calibration of stylus instruments and the annexes give information regarding their calibration and application to the calibration and adjustment in laboratories, standards rooms and workshops.
Covers all elements, made of any material, with vertically hinged door leaves in the normal operating condition for which they are designed and installed. The test may be carried out on doorsets installed in a finished building or in a laboratory test rig. The horizontal force required for closing is used as a parameter for quanifying the operating performance. For terms and definitions see 1804…
1. Scope
1.1 This method of test is applicable to firestop systems incorporating through
penetrations or poke-through termination devices as well as to firestops alone
(material with no penetrations). These firestop systems are intended for use
in openings in fire resistive wall and floor assemblies which are evaluated in
accordance with CAN4-S101M, Standard Methods of Fire Endurance…
Solid timber in structural sizes — Determination of some physical and mechanical properties
Laboratory methods are specified for determining the modulus of elasticity in static bending, shear modulus, bending strength, modulus of elasticity in tension, tension strength parallel to the grain, modulus of elasticity in compression, compression strength parallel to the grain and dimensions, moisture content, and density. The methods apply to rectangular and square sections of solid…
