Rechercher

This document specifies requirements for the sampling and analysis of air, surface or bulk material samples analysed by fluorometric detection of an enzyme activity present in filamentous fungi[1] (US Patent No. 6,372,446) to quantitatively determine the total fungal biomass density. It describes the analytical procedure that can be performed on-site or in a laboratory. This method does not…

Scope 1.1 This Standard addresses battery containment enclosures intended to mitigate the heat, fire, and deflagration hazards that can result from lithium-ion battery thermal runaway. 1.2 These requirements do not address the toxicity hazards associated with thermal runaway of lithiumion cells, batteries, battery packs, or battery-powered devices. 1.3 A battery containment enclosure covered…

This document specifies requirements for the integration of industrial robot applications and industrial robot cells. The following are addressed: —     the design, integration, commissioning, operation, maintenance, decommissioning and disposal; —     integration of machines and components; —     information for use for the design, integration, commissioning, operation, maintenance,…

This document describes the time of flight diffraction (TOFD) testing of polyethylene butt fusion (BF) joints, including pipe-to-pipe, pipe-to-fitting and fitting-to-fitting joints, used for the conveyance of fluids. This document provides a test to detect imperfections such as voids, inclusions, lack of fusions, misalignment and particulate contamination in the BF joints. The document only…

This document specifies an amperometric method to determine the content of damaged starch in flour. It is applicable to all flour samples from the industrial or laboratory milling of wheat (Triticum aestivum L.). NOTE 1        Wheat can be milled in the laboratory in accordance with the methods described in ISO 27971[9] or in the BIPEA guidance document BY.102.D[10]. NOTE 2        In the absence…

This document gives general information on the key steps for the preparation of candidate matrix reference materials (RMs) including the material specification, sourcing and selection of bulk material, and the processing of the material, which are important steps for the production of matrix RMs. The document provides information on the preparation of candidate RMs for laboratory staff who…

This document specifies test methods for determining the physical properties of synchronous belts used in driving engine parts, such as camshafts, fuel injection pumps, balancing shafts. These test methods are intended to provide a means of characterizing synchronous belt properties for belts which are evaluated and qualified by dynamic laboratory and field testing.

This document specifies the laboratory test method for determining the field of vision for a respiratory protective device (RPD).

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring MAINS. Hand-held multimeters are multi-range…

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements to equipment for measuring insulation resistance and to equipment for testing electric strength which have an output voltage exceeding 50 V a.c. or 120 V d.…