Radio interference test on high-voltage insulators
Specifies the procedure for a radio interference (RI) test carried out in a laboratory on clean and dry insulators at a frequency of 0,5 MHz or 1 MHz or, alternatively, at other frequencies between 0,5 MHz and 2 MHz.
Scope
O80.0-1.1
This Standard sets forth requirements for materials, analysis of materials, and operational practices for pressure and thermal impregnation for the chemical preservation of wood.
1.2
The recommendations made in this Standard are based solely on the efficacy of the preservative in any specific application. As preservatives and their uses are regulated by government…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-1...
A technical report for use by test houses and other users to assist them with determining and recording verification of conformity of the equipment under test with the requirements of IEC 61010-1 (1990) plus Amendment 1 (1992) and Amendment 2 (1995). If the paper version of the report is ordered, a diskette is provided with fill-in tables for recording the test results. If the report is…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: ...
A technical report type 3 which provides a test protocol for testhouses and other users to assist them with determining and recording verification of the conformity of the equipment under test with the reference documents identified on the front cover of the appropiate report.
Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood
This National Standard of Canada is equivalent to International Standard ISO 10993-4:1992.
1 Scope
This part of ISO 10993 gives guidance to agencies, manufacturers, research
laboratories and others for evaluating the interactions of medical devices with
blood.
It describes:
a) a classification of medical and dental devices that are intended for use in
contact with blood, based…
Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system fo...
This National Standard of Canada is equivalent to International Standard ISo
10012-1:1992.
1 Scope
1.1 This part of ISO 10012 contains quality assurance requirements for a
Supplier to ensure that measurements are made with the intended accuracy. It
also contains guidance on the implementation of the requirements.
1.2 This part of ISO 10012 specifies the main features of the…
