Model Code for the Field Evaluation of Electrical Equipment
1. Scope
1.1 This Model Code provides construction, marking, and test requirements for
the field evaluation of electrical/electronic equipment on behalf of
participating provinces and territories by a certification organization or an
inspection agency recognized by the regulatory authority.
1.2 This Model Code applies, but is not limited, to the following:
(a) custom-built equipment…
Petroleum products — Determination of particulate content of middle distillate fuels — Laboratory fi...
This International Standard specifies a method for the determination of the particulate content of middle distillate
fuels with a closed flash point of 38 °C or higher, determined in accordance with ISO 2719, ISO 3679 or ISO 13736.
It is not applicable to light distillate fuels (gasolines) or to aviation fuels.
A gravimetric limitation of the contamination of middle distillate fuels used in…
Ageing of thermal insulation materials — Determination of the long-term change in thermal resistance...
This International Standard specifies two laboratory test methods, based on slicing and scaling techniques, to
determine the long-term changes in the thermal resistance of closed-cell (normally 90 %) cellular plastic materials
that contain gases which, through diffusion processes, affect the properties of a foam with time.
Using standard methods for the measurement of thermal resistance, method A…
This International Standard specifies a method for the secondary calibration of acoustic emission sensors as
receivers of elastic waves at the surface of a solid medium. The International Standard is applicable to laboratory
tertiary standard sensors and acoustic emission applications sensors.
The secondary calibration yields the frequency response of a sensor to waves of a type normally…
1. SCOPe
1.1 This Standard covers requirements for control units, fire alarm systems
and control unit accessories for use in accordance with the Standard for the
Installation of Fire Alarm Systems, CAN/ULC-S524, in accordance with Rule
32-004(1) of the Canadian Electrical Code, Part I, and the National Building
Code of Canada.
1.2 If a fire alarm system incorporates the features and…
Hand-held portable power tools — Measurement of vibrations at the handle — Part 11: Fastener driving...
This part of ISO 8662 specifies a laboratory method for measuring the single-event vibration at the handle of
fastener driving tools, where a single event is a mechanical shock or a series of individual shocks at intervals longer
than 0,2 s. It is a type test procedure for establishing the vibration value in the handle of a hand-held power tool
operating under a specified load.
NOTE Fastener…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-0...
A technical report for use by test houses and other users. It assists them with determining and recording verification of conformity of the equipment under test with the requirements of IEC 61010-2-020 (1992) plus Amendment 1 (1996). If the paper version of the report is ordered, a diskette is provided with fill-in tables for recording the test results. If the report is downloaded directly from…
