Rechercher

specifies minimum requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply of less than 1 000 V a.c. or 1 500 V d.c. or from the circuit being measured, intended for professional, industrial-process and educational use, including equipment and computing devices. The contents of the corrigendum of July 2002 have been…

Deals with the safety of hand-held and hand-manipulated probe assemblies. They are for use in the interface between an electrical phenomenon and test or measurement equipment. Three main types are described: (A) Low-voltage and high-voltage, non-attenuating probe assemblies. For voltages less lthan 63 kV. They do not incorporate active components. (B) High-voltage attenuating or divider probe…

Applies to equipment intended for in vitro diagnostic (IVD) medical purposes. This is used for the examination of specimens, including blood and tissue samples, derived from the human body. The standard also covers self-test IVD medical equipment for use by lay persons.

ISO 20870 specifies laboratory procedures which are intended to imitate the effects of naturally-occurring reactions. The physical properties of interest are measured before and after the application of the specified treatments.

1 Scope 1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, and to household use floor finishing machines to be employed in accordance with the Canadian Electrical Code Part I (CEC), and the National Electrical Code (NEC), ANSI/NFPA 70. 1.2 These requirements cover: a) household, commercial, and coin-operated vacuum cleaning machines and blower…

1. Scope 1.1 General This Guideline provides information and methodology to identify and evaluate hazards caused by earthquake forces acting on operational and functional components (OFCs) and to undertake appropriate mitigation strategies and techniques. It is important to note that seismic risk reduction of OFCs is affected by the structural performance of the building, although the…

This part of ISO/TS 11155 specifies a particulate filtration test, including the critical characteristics of equipment, test procedure and report format, for the consistent assessment of filter elements in a laboratory test rig with particle sizes larger than 0,3 μm. It is applicable to filters for removing particulate matter from external or recirculated air used for ventilating motor vehicle…

This Technical Report provides information on the effect of water-soluble chloride and sulfate contamination levels on steel surfaces, before the application of paint or related products to surfaces prepared in accordance with standard mechanical or blast-cleaning surface preparation methods. NOTE The tolerance for water-soluble salt contamination may be different for different paint types. This…

Applies to working standard microphones with removable protection grids meeting the requirements of IEC 61094-4 and to laboratory standard microphones meeting the requirements of IEC 61094-1. Describes methods of determining the pressure sensitivity by comparison with either a laboratory standard microphone that has been calibrated according to IEC 61094-2, or another working standard…

This International Standard specifies a method for the determination of the mass loss of rigid cellular plastics as a result of a combination of abrasion and impact produced by a laboratory tumbling mechanism.