Rechercher

ISO 8224-1:2002 specifies the operational characteristics of, and laboratory and field test methods for, traveller irrigation machines. It includes user-oriented technical information for presentation in the manufacturer's accompanying product literature, laboratory test procedures for evaluating the uniformity of water application on an irrigated strip by a machine operating within a…

1 Scope 1.1 This Standard specifies general requirements related to the safety of human cells, tissues, and organs used for transplantation and assisted reproduction purposes. It includes aspects of safety for potential and actual donors and recipients, personnel, and others who may be exposed to or affected by the transplantation of cells, tissues, or organs. This Standard is intended to serve…

ISO 9239-2 specifies a method for assessing the burning behaviour of horizontally mounted flooring systems exposed to a heat flux gradient in a test chamber, when ignited with pilot flames. The radiant heat gradient is higher than the one described in ISO 9239-1 in order to simulate conditions in a corridor adjacent to a room containing a fully developed fire (post-flashover). This method is…

ISO 16702:2002 describes methods for the determination of soil microbial respiration of aerobic, unsaturated soils. The methods are suitable for the determination of O2 uptake or CO2 release, either after addition of a substrate (substrate-induced respiration), or without substrate addition (basal respiration). ISO 16702:2002 is applicable to the measurement of soil respiration in order to:…

ISO 2418:2002 specifies the location of a laboratory sample within a piece of leather and the method of labelling and marking the laboratory samples for future identification. It is applicable to all types of leather derived from mammals irrespective of the tanning used. It is not applicable to leathers derived from birds, fish or reptiles.

1 Scope 1.1 This Standard applies to the material of construction, the physical integrity, and the labelling requirements of biohazardous and cytotoxic medical sharps containers. 1.2 This Standard applies to medical sharps containers intended for single use. 1.3 This Standard specifies test criteria for the evaluation of the following characteristics of sharps containers: a)…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14515-1:2000/IEEE 2003.1, 1992 (first edition, 2000-12-15). 1.1 Scope This standard defines the general requirements and test methods for measuring conformance to ISO/IEC 9945-1 :1990 (IEEE Std 1003.1-1990) hereinafter referred to as .POSIX.1. {3}.1 It also defines the test assertions for measuring conformance…

ISO 10416:2002 provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid. It is not intended as a detailed manual on drilling fluid control procedures. Recommendations regarding agitation and testing…

ISO 15011-3 defines a laboratory method for evaluating ozone emissions generated during arc welding by measuring ozone concentrations at fixed points around a stationary welding arc. The results may be used to compare the effect of welding parameters, processes, etc. on ozone generation and hence to predict changes in workplace exposure under similar working conditions.

ISO 15705:2002 specifies a method for the determination of the chemical oxygen demand (ST-COD) using the sealed tube method. The test is empirical and is applicable to any aqueous sample, which includes all sewage and waste waters. The method is applicable to undiluted samples having ST-COD values up to 1 000 mg/l and a chloride concentration not exceeding 1 000 mg/l. Samples with higher ST-COD…