Information technology - Open Systems Interconnection - Conformance testing methodology and framewor...
Cancels and replaces the first edition (1991). Specifies requirements on both the test laboratory and the client, for the conduct of the conformance assessment process. Also provides some guidance on the conformance assessment process.
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
Cancels and replaces the first edition (1985). Specifies two methods for the determination of the flat crush resistance of corrugating medium after laboratory fluting. The procedures are applicable to any paper intended to be used, after fluting, in the manufacture of corrugated fibreboard.
Rubber latex — Determination of density between 5 degrees C and 40 degrees C
Cancels and replaces the first edition (1974) and amendment 1 (1994). Specifies a method for the determination of the density of natural rubber latex concentrate between the temperatures of 5 °C und 40 °C. Intended for use when density determinations are used to calculate the mass of a measured volume of latex in locations where it is not practical to weigh directly or to control the temperature…
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitori...
Specifies the standard atmosphere for conditioning and testing pulp, paper, and board, and also the procedures for measuring the temperature and relative humidity. For the conditioning of laboratory prepared handsheets in accordance with ISO 5269-1, the standard atmosphere is that defined in this standard, but the procedure is different. Annex A covers the measurement of temperature and relative…
This first edition cancels and replaces the first edition of the Technical Report ISO/TR 5007:1980. Specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an tractor. Applies to seats fitted to tractors within specified classes, each class being defined as a group of tractors having similar…
Ferronickel ingots or pieces — Sampling for analysis
Applies to ferronickel lots in ingot or piece form with a view to obtaining a representative laboratory sample for the determination of the chemical composition of the lot. A choice is to be made between a first procedure that can be applied at the producer's plant during casting or a second procedure that can be applied to lots as delivered at the buyer's premises. Includes two…
Road vehicles — Calibration fluid for diesel injection equipment
Specifies the requirements for a calibration fluid with which diesel injection equipment may be calibrated and tested in production, in service, and in laboratories. Tabulates characteristics, units of measurement, desired values, and methods of determination. This second edition cancels and replaces the first edition (1978).
Specifies a test method for passenger cars, which permits the direct comparison of results obtained in different test laboratories. Two figures illustrate shapes and reference quantities of concern. This second edition cancels and replaces the first edition (1977).
