Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials
This document describes tools and gives guidance concerning interlaboratory trials related to fire effluent analyses. It explains the relative contributions from the physical fire model and analytical techniques to evaluate trueness and fidelity. It also explains the difficulties involved with the interpretation of round-robin data and with the evaluation of trueness in fire effluent analyses.…
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
ISO 4892-4:2013 specifies methods for exposing specimens to open-flame carbon-arc lamps in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass.
Requirements and recommendations for supervisors and operators of point-of-care testing (POCT) equip...
This document gives guidance for supervisors and operators of point-of-care testing (POCT) services where POCT is performed without medical laboratory training, supervision or support. It includes the key components that should be considered to provide safe and reliable POCT results.
Self-testing is excluded from this document.
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of...
ISO/TS 11999-2:2015 describes compatibility for ensembles of firefighters personal protective equipment (PPE) to be used by firefighters, who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures.
ISO/TS 11999-2:2015 includes methods for compatibility testing in laboratories and procedures for compatibility testing including the identification of…
Road vehicles — Box task and detection response task to measure visual-manual and cognitive demand
This document defines key terms and parameters applied in the analysis of cognitive and visual-manual workload induced by transport information and control systems (TICS). It provides guidelines and minimum requirements on equipment and procedures for analysing cognitive and visual-manual load including assessment of TICS to:
— plan evaluation trials;
— specify (and install) data capture…
Coal preparation — Determination of dust/moisture relationship for coal
ISO 20905:2004 sets out a laboratory procedure for the dust testing of higher rank coals. The procedure defines a means of evaluating the dust/moisture relationship characteristic of a coal and a dust extinction moisture (DEM).
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Re...
ISO 13347-2:2004 gives a detailed description of reverberant room methods for the determination of fan sound power levels. It is for use under standardized laboratory conditions and recognises that tests in situ are subject to increased uncertainty. These test procedures are not necessarily appropriate to site test conditions. Acoustic system effects are presently the subject of considerable…
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: So...
ISO 13347-4:2004 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined.
The sizes of the fan, which can be tested in accordance with ISO 13347-4:2004, are limited only by the practical…
Synchronous belt drives — Automotive belts — Determination of physical properties
This International Standard specifies test methods for determining the physical properties of synchronous belts
used in driving engine parts, such as camshafts, fuel injection pumps, balancing shafts. These test methods
are intended to provide a means of characterizing synchronous belt properties for belts which are evaluated
and qualified by dynamic laboratory and field testing.
NOTE The…
Health informatics — Guidelines for exchanging data generated by portable polymerase chain reaction ...
This document identifies use cases related to the exchange of information between new small-sized point of care testing devices that enable real time PCR testing for diagnosis of infectious diseases, and clinical laboratories.
This document is applicable to use cases of small-sized real time PCR devices, including those that:
a) general test;
b) lack of patient information;
c) cancel and rerun…